Quax COCOON 54F01-0300 Serie Bauanleitung Seite 31

COCOON 54F01-0300x
Step 4.6 : Use the parts from previous steps and six wood
screws D
1. Push the left end side (2) with its wooden dowels into the
drillings of the bottom (5). Push two wood screws (D) into the
holes on the underside of the bottom and tighten them in the
end side. Have a second person hold this side.
2. Push the fi xed shelf (2) with its wooden dowels into the
drillings on the side without sliders from the intermediate
side (3). Push two wood screws (D) into the holes at the
bottom of the intermediate side and tighten them in the shelf.
3. Push this construction with the wooden dowels of the
shelf into the drillings and over the connectors of the end
side. Tighten the minifi x at the bottom of the shelf. Let the
second person hold all of this.
4. Push the right end side (1) with its wooden dowels into the
drillings of the bottom (5). Push two wood screws (D) into the
holes on the underside of the bottom and tighten them in the
end side. Hold this side too.
5. Push the top (6) with its connectors into the drillings and
over the wooden dowels of both end sides and the interme-
diate side. Tighten the minifi x in all sides.
Quax nv Karel Picquélaan 84 B-9800 Deinze Belgium T T 0032 9 380 80 95 www.quax.eu - E E info@quax.eu
31