Functions Of The Test Button; Properties Of The Base - HumanTechnik lisa Bedienungsanleitung

10. Functions of the test button

By means of the test button, the respective functions of the smoke
detector are initiated or acknowledged.
By simply pressing the button you can
EN
- Start the function test in normal operation.
- Acknowledge a malfunction.
- Acknowledge/mute an alarm.
- Delete the alarm memory.
- Test transmission function to the lisa RF receivers.
Test button

11. Properties of the base

If the smoke detector is inserted into the base, it starts operation
automatically and carries out a self-test.
If it is removed from the base, the smoke detector turns off after 5
minutes. If the detector is removed from the base during an alarm,
the alarm is muted.
51