FMS P-51 V2 Dago Red Bedienungsanleitung Seite 6

E
N
Model assembly
Installation of the pushrods
1.With the servos centered, install the pushrod as
shown and adjust until the control surface is neutral
when no input is given.
Installation of pitot tube
1. Apply foam safe glue at wingtip, then insert the
pitot tube as shown.
Installation of propeller and spinner set
1. Assemble the spinner and propeller as shown.
Foam-safe glue
e
6
b
a
c
d
HKM3.0*20