Safety Warnings - Makita EM408MP Originalbetriebsanleitung

Never use metal blade.
Intended use
For EM408MP
This attachment is designed only for the purpose of cutting
grass, weed, bushes and undergrowth in conjunction with an
approved power unit. Never use the attachment for the other
purpose. Abusing the attachment may cause serious injury.
For EM409MP
This attachment is designed only for the purpose of trim-
ming grass and light weed in conjunction with an approved
power unit. Never use the attachment for the other pur-
pose. Abusing the attachment may cause serious injury.
WARNING:
Read the instruction manual of
the attachment as well as this instruction manual
before using. Failure to follow the warnings and
instructions may result serious injury.
EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V., Business
address: Jan-Baptist Vinkstraat 2 3070 Kortenberg BELGIUM.
Authorize Hiroshi Tsujimura for the compilation of the technical
file and declare under our sole responsibility that the product(s);
Designation: Grass Trimmer Attachment. Designation
of Type(s): EM408MP / EM409MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN ISO 11806-1:2011, EN 60745-1:2009+A11:2010.
Place and date of declaration: Kortenberg, Belgium. 01. 06. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Grass Trimmer Attachment. Designation
of Type(s): EM408MP / EM409MP.
Fulfills all the relevant provisions of S.I. 2008/1597 (as
amended) and also fulfills all the relevant provisions
of the following UK Regulations: S.I. 2001/1701 (as
amended) and are manufactured in accordance with
the following Designated Standards: EN ISO 11806-
1:2011, EN 60745-1:2009+A11:2010.
Place and date of declaration: Kortenberg, Belgium. 01. 06. 2020
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive, Tongwell,
Milton Keynes, Buckinghamshire, MK15 8JD, UK

SAFETY WARNINGS

Grass trimmer safety warnings
WARNING:
instructions, illustrations and specifications pro-
vided with this machine. Failure to follow all instruc-
tions listed below may result in fire and/or serious
injury to the operator and/or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "grass trimmer" and "machine" in the warnings and precau-
tions refer to the combination of the attachment and the power unit.
The term "motor" in the warnings and precautions refers
to the engine or electric motor of the power unit.
General safety
1. First-time or inexperienced operator should
ask the dealer for training in all operation of the
machine. Never allow children, persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge or people unfa-
miliar with the instructions to use the machine.
2. It is recommended only to lend the machine
to people who have proven to be experienced.
Always hand over the instruction manual.
3. Stay alert, watch what you are doing and use common
sense when operating the machine. Do not use the
machine while you are tired, ill, or under the influence of
drugs, alcohol or medication. A moment of inattention while
operating the machine may result in serious personal injury.
4. Avoid using the machine in bad weather condi-
tions especially when there is a risk of lightning.
5. Follow your national and local regulation for
use of outdoor power machines.
Intended use of machine
This machine is only intended for cutting grass, weeds,
bushes and undergrowth. Never use the machine for
any other purpose such as edging or hedge cutting.
Use for unintended purpose may result in serious injury.
Personal protective equipment
1. Always wear heavy, long pants, sturdy boots,
gloves, and a long-sleeve shirt. Do not wear loose
clothing, jewelry, short pants, sandals, or go
barefoot. Secure hair so it is above shoulder level.
2. Always wear a helmet where there is a risk of
falling objects.
3. Always wear protective goggles to protect your eyes
from injury when using the machine. The goggles
must comply with ANSI Z87.1 in the USA, EN 166 in
Europe, or AS/NZS 1336 in Australia/New Zealand. In
Australia/New Zealand, it is legally required to wear
a face shield to protect your face, too.
8 ENGLISH
Read all safety warnings,