Herunterladen Inhalt Inhalt Diese Seite drucken
Samsung Jet Bot VR30T85-Serie Benutzerhandbuch
Vorschau ausblenden Andere Handbücher für Jet Bot VR30T85-Serie:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Jet Bot
User manual
VR30T85**** series
• For full manual, Scan QR code or access online at https://www.samsung.com
• Before operating this unit, please read the instructions carefully.
• For indoor use only.

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Samsung Jet Bot VR30T85-Serie

  • Seite 1 Jet Bot User manual VR30T85**** series • For full manual, Scan QR code or access online at https://www.samsung.com • Before operating this unit, please read the instructions carefully. • For indoor use only.
  • Seite 2 Clean Station Power cord Boundary Markers User Manual • If you want to purchase an additional Dust Bag, check the model name (VCA-RDB95) and Samsung logo ( ) first, then contact your nearest Samsung Electronics retailer or Samsung service center.
  • Seite 3 0.5 m 0.5 m...
  • Seite 9: Operation And Maintenance

    Operation and maintenance A. Installation B-2 Starting cleaning • Press the [ ] on the Jet Bot to start cleaning in Auto Clean. NOTE • Press the [ ] on the Jet Bot to stop • Install the Clean Station in a place where the operation while cleaning.
  • Seite 10: Safety Information

    Failure to meet these requirements could • For information on Samsung’s cause damage to the internal parts of the environmental commitments and product vacuum and void your warranty.
  • Seite 11 Safety information • Do not pull or carry by the cord, use the - Locations with distilled alcohol, thinner, cord as a handle, close the door on the ashtrays with burning cigarettes, etc. cord, or pull the cord around sharp edges •...
  • Seite 12 Safety information • Make sure there are no dangerous objects CAUTION around the Jet Bot’s cleaning area to prevent collision and unplug any electric • Insert the Dustbin before using the Jet Bot. heaters or fans. • When installing the Clean Station, do not - The Jet Bot can be damaged or leave the cord carelessly on the floor since malfunction.
  • Seite 13 Jet Bot and certified repairman. contact a service center. - There is a risk of fire or electric shock. • Please check with a SAMSUNG Electronics CAUTION service center when replacing batteries. • Using the Jet Bot on a thick carpet may - Using batteries from other products can damage both the Jet Bot and the carpet.
  • Seite 14 Safety information • Always keep the Obstacle Sensor Window and the Cliff Sensor Window clear. - If foreign matter accumulates, sensors may malfunction. • Do not store the Jet Bot in a car. • Be careful that the LiDAR sensor is not exposed to a direct light such as sun light, infrared light, etc.
  • Seite 15 Notes and cautions Installation • If the Jet Bot is left detached from the Clean Station, the battery will drain naturally. NOTE - Try to keep the Jet Bot being charged on • If the cleaning area is wooden floors, it is the Clean Station.
  • Seite 16 - Dustbin: Completely wipe out the water. service center. - Filter: Completely dry it in the shade • This battery is exclusively for the SAMSUNG before use. Electronics Jet Bot. Do not use it for any • Do not use water to clean the Fine dust other products or purposes.
  • Seite 17 Jet Bot device card is added. Setting up a SAMSUNG account • You must sign in to a SAMSUNG account before using the SmartThings App. • To set up a SAMSUNG account, you can follow the directions provided by the SmartThings App.
  • Seite 18 SmartThings App Functions of the SmartThings App Classification Functions Explanation • You can check the result of the last cleaning. Monitoring Cleaning Report • You can check the histories of last 50 cleanings. • You can stop cleaning and have the Jet Bot return to Dock the Clean Station.
  • Seite 19 Troubleshooting Symptom Checklist • Check if the power switch is on. • Check if the Status Indicator is on. • Check if the Jet Bot's battery is depleted. - When the Jet Bot’s Status Indicator turns red and stays red, place The Jet Bot is not the Jet Bot manually on the Clean Station to charge it.
  • Seite 20: Product Specification

    Transmitter power(Max) 20 dBm • Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support >...
  • Seite 21 Product specification Height Name Clean Station Rated voltage 220-240 V ~ 50-60 Hz Rated output current 25.85 V, 1.0 A Charging 40 W Power consumption Operation 1300 W (When using suction power) Weight 5.0 kg Size W 280 mm x D 400 mm x H 525 mm Operating time About 18 seconds English 21...
  • Seite 22: Open Source Announcement

    The software included in this product contains open source software. To obtain the source code covered under licenses which have the obligation of publishing source code (e.g. GPL, LGPL… etc), please visit http://opensource.samsung.com/ and search by model name. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;...
  • Seite 23: Warnings About Battery

    Warnings about battery You must not remove (or attempt to remove) the battery incorporated in this product on your own. To replace the battery, you must contact your service provider or an independent qualified professional. These instructions have been prepared for the exclusive use of your service provider or independent qualified professional.
  • Seite 24 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site www.samsung.com/ch/support (German) SWITZERLAND 0800 726 78 64 (0800-SAMSUNG) www.samsung.com/ch_fr/support (French) AUSTRIA 0800 72 67 864 (0800-SAMSUNG)
  • Seite 25 Jet Bot Benutzerhandbuch Baureihe VR30T85**** • Ausführliche Anleitung: QR-Code scannen oder online auf https://www.samsung.com • Lesen Sie die Anweisungen sorgfältig durch, ehe Sie das Gerät in Betrieb nehmen. • Es ist nur zum Einsatz in geschlossenen Räumen geeignet.
  • Seite 26: Unterseite

    Netzkabel Grenzmarkierungen Benutzerhandbuch • Wenn Sie einen zusätzlichen Staubsaugerbeutel kaufen möchten, notieren Sie zuerst die korrekte Modellbezeichnung (VCA-RDB95) und über prüfen Sie das Samsung-Logo ( Wenden Sie sich dann an Ihren nächstgelegenen Händler Samsung Electronics oder an Samsung- Kundendienstzentrum. Deutsch...
  • Seite 27: Betrieb Und Pflege

    Betrieb und Pflege A. Aufstellung B-2 Beginnen der Reinigung • Drücken Sie auf die Taste [ ] am Jet Bot, um das Reinigen im Automatikmodus zu starten. HINWEIS • Drücken Sie auf die Taste [ ] am Jet Bot, um •...
  • Seite 28: Sicherheitsinformationen

    Spielzeug verwendet wird. Wenn • Weitere Informationen zu den Haushaltsgeräte in der Nähe von Kindern oder Umweltverpflichtungen von Samsung und zu von Kindern selbst betrieben werden, ist eine produktspezifischen gesetzlichen Pflichten sorgsame Aufsicht notwendig. (z.B. REACH, WEEE; Batterien) finden Sie •...
  • Seite 29 Sicherheitsinformationen Reinigungsstation Jet Bot • Manipulieren Sie den geerdeten Stecker nicht, • Saugen Sie keine harten oder scharfen um ihn an eine ungeerdete Steckdose oder ein Gegenstände wie Glas, Nägel, Schrauben, ungeerdetes Verlängerungskabel anschließen Münzen usw. auf. zu können. • Verwenden Sie das Gerät niemals ohne Filter. •...
  • Seite 30 Sicherheitsinformationen Hinweise zur Stromversorgung • Der Jet Bot ist zum Gebrauch im Haushalt bestimmt. Verwenden Sie ihn deshalb nicht zur Reinigung von Kellern, Dachböden, WARNUNG Lagerräumen, industriell genutzten Gebäuden, Flächen im Außenbereich oder in feuchter • Beugen Sie der Gefahr eines Stromschlags oder Umgebung (z.
  • Seite 31 Sicherheitsinformationen • Um Ihre ganze Wohnung zu reinigen, • Ehe Sie den Jet Bot einschalten, beseitigen Sie müssen Sie alle Räume öffnen und mit der zerbrechliche Objekte wie Rahmen, Spiegel und SmartThings-App zur Sicherheit etwaige Porzellangegenstände, damit der Jet Bot ohne Sperrzonen festlegen oder Grenzmarkierungen Unterbrechung arbeiten kann.
  • Seite 32 • Wenden Sie sich für einen Austausch der oder wird beschädigt. Batterien an ein Kundendienstzentrum von • Entfernen Sie vor der Reinigung alle SAMSUNG Electronics. Gegenstände, die weniger als 9 cm hoch - Die Verwendung von Batterien aus anderen sind und leicht auf dem Boden liegen, da Geräten kann zu Fehlfunktionen führen.
  • Seite 33: Betrieb

    Hinweise und Vorsichtsmaßnahmen Aufstellung • Die Batterie entlädt sich langsam von selbst, wenn der Jet Bot von der Reinigungsstation getrennt ist. HINWEIS - Entfernen Sie den Jet Bot, während er geladen wird, möglichst nicht von der • Stellen Sie die Reinigungsstation bei Reinigungsstation.
  • Seite 34 Jet Bot keine Zahnstocher, Wattestäbchen usw. verlängert sich ihre Ladezeit und ihre aufsaugt. Nutzungszeit nimmt ab. Wenden Sie sich in • Wenden Sie sich an ein offizielles SAMSUNG- diesem Fall an ein Kundendienstzentrum und Kundendienstzentrum, wenn Sie Probleme ersetzen Sie sie durch eine neue Batterie.
  • Seite 35 Konto bei den Einstellungen Ihres Smartphones Wi-Fi-Funktion verfügen. hinzufügen. Danach meldet es sich automatisch Wenn Sie nicht über einen Wi-Fi-Router bei Ihrem SAMSUNG-Konto an und Sie können verfügen, können Sie die SmartThings-App die SmartThings-App nutzen. nicht verwenden. Registrieren eines Geräts für die...
  • Seite 36 SmartThings-App Funktionen der SmartThings-App Klassifikation Funktionen Erläuterung • Sie können das Ergebnis der letzten Reinigung kontrollieren. Überwachung Reinigungsbericht • Sie können die Historie der letzten 50 Reinigungen einsehen. • Sie können die Reinigung beenden und den Jet Bot zur anfahren Reinigungsstation zurückfahren lassen.
  • Seite 37 Fehlersuche Problem Checkliste • Kontrollieren Sie, ob der Netzschalter in der Ein-Position steht. • Kontrollieren Sie, ob die Statusanzeige leuchtet. • Kontrollieren Sie, ob die Batterie des Jet Bot leer ist. - Wenn die Statusanzeige des Jet Bot dauerhaft rot leuchtet, müssen Sie den Der Jet Bot funktioniert Jet Bot manuell in die Reinigungsstation einsetzen, damit er geladen wird.
  • Seite 38: Technische Daten Des Geräts

    Wi-Fi Senderleistung (Max) 20 dBm • Samsung Electronics erklärt hiermit, dass diese Vorrichtung vom Gerätetyp Funkgerät der Richtlinie 2014/53/EU entspricht. Der gesamte Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: Die offizielle Konformitätserklärung ist unter http://www.samsung.com zu finden. Gehen Sie zu Support > Produktsupport durchsuchen und geben Sie den Modellnamen ein.
  • Seite 39 Technische Daten des Geräts Höhe Name Reinigungsstation Nennspannung 220-240 V ~ 50-60 Hz Nennausgangsstrom 25,85 V; 1,0 A Laden 40 W Leistungsaufnahme Betrieb 1300 W (bei voller Saugleistung) Gewicht 5,0 kg Größe 280 mm x 400 mm x 525 mm (BxTxH) Betriebszeit Etwa 18 Sekunden Deutsch 15...
  • Seite 40: Informationen Über Open-Source-Software

    Die in diesem Gerät verwendete Software enthält Open Source-Code. Um den Quellcode zu erhalten, der durch Lizenzen mit einer Pflicht zur Veröffentlichung des Quellcodes geschützt ist (z. B. GPL, LGPL usw.), besuchen Sie bitte http://opensource.samsung.com/ und suchen Sie nach der Modellbezeichnung.
  • Seite 41: Warnhinweise Zum Akku

    Warnhinweise zum Akku Sie dürfen den in dieses Produkt eingebaute Akku keinesfalls selbst entfernen oder einen entsprechenden Versuch unternehmen. Wenden Sie sich für einen Austausch des Akkus unbedingt an Ihren Dienstleister oder eine unabhängige qualifizierte Fachkraft. Diese Anweisungen sind ausschließlich für den Gebrauch durch Ihren Dienstleister oder eine unabhängige qualifizierte Fachkraft bestimmt.
  • Seite 43 Jet Bot Manuel d’utilisation Série VR30T85**** • Pour consulter le manuel dans son intégralité, scannez le QR code ou rendez vous sur le site https://www.samsung.com • Avant d’utiliser cet appareil, veuillez lire attentivement les instructions. • Utilisation en intérieur uniquement.
  • Seite 44 • Si vous souhaitez acheter un sac à poussière supplémentaire, vérifiez d’abord le nom du modèle (VCA-RDB95) et le logo Samsung ( ), puis prenez contact avec votre revendeur Samsung Electronics le plus proche ou avec un centre de réparation Samsung. Français...
  • Seite 45: Fonctionnement Et Entretien

    Fonctionnement et entretien A. Installation B-2 Démarrage du nettoyage • Appuyez sur le bouton [ ] du Jet Bot pour REMARQUE commencer le nettoyage en mode Nettoyage automatique. • Installez la Clean Station à un endroit où le sol • Appuyez sur le bouton [ ] du Jet Bot pour et le mur sont plats.
  • Seite 46: Consignes De Sécurité

    à vigilant. l'appareil (par ex. directive REACH (DEEE, • Utilisez l’appareil exclusivement comme décrit batteries)), consultez le site Web : samsung. dans le présent manuel. com/uk/aboutsamsung/samsungelectronics/ • N’utilisez pas le Jet Bot ou la Clean Station s’il/ corporatecitizenship/data_corner.html...
  • Seite 47 Consignes de sécurité • Utilisez uniquement la Clean Station fournie • N’aspirez jamais de liquides inflammables ou par le fabricant pour recharger l’appareil. combustibles tels que de l’essence et n’utilisez jamais l’appareil si de tels liquides risquent • N’utilisez pas de cordon ou de fiche d’être présents.
  • Seite 48 Consignes de sécurité Avant utilisation • Étant donné que cette installation sans fil peut occasionner des interférences radioélectriques, elle ne peut pas assurer de service en lien avec AVERTISSEMENT la sécurité humaine. • N’utilisez pas le Jet Bot près d’un radiateur ou ATTENTION de substances combustibles.
  • Seite 49 à la fois le Jet Bot et le tapis. • Veuillez vous rapprocher d’un centre de - Le Jet Bot ne peut pas monter sur un tapis dépannage SAMSUNG Electronics lors du dont la longueur de fibre est supérieure à remplacement de batteries.
  • Seite 50 Consignes de sécurité • Ne démontez pas et ne réparez pas le Jet Bot. Ces opérations doivent être effectuées par un réparateur certifié. • Veillez à ce que la fenêtre du capteur d’obstacles et celle du capteur d’escarpement soient toujours propres. - Si des corps étrangers s’accumulent, les capteurs risquent de présenter un dysfonctionnement.
  • Seite 51: Remarques Et Mises En Garde

    Remarques et mises en garde Installation Utilisation REMARQUE REMARQUE • Si la zone à nettoyer a un sol en bois, le mieux • Le Jet Bot risque de se prendre sur des seuils est d’installer la Clean Station dans le sens du de porte d’entrée ou de véranda, etc.
  • Seite 52 • Cette batterie est exclusivement conçue pour le Jet Bot de SAMSUNG Electronics. Ne l’utilisez pas pour d’autres appareils ou à d’autres fins. • Ne démontez pas et ne modifiez pas la batterie.
  • Seite 53 6 [Android] La connexion à votre routeur sans fil s’effectuera automatiquement. Création d’un compte SAMSUNG - [iOS] Ouvrez l’application des réglages et • Vous devez créer un compte SAMSUNG pour sélectionnez le routeur sans fil dans la liste pouvoir utiliser l’application SmartThings. des appareils Wi-Fi.
  • Seite 54 Application SmartThings Fonctions de l’application SmartThings Classification Fonctions Explication • Vous pouvez vérifier le résultat du dernier nettoyage. Rapport de Surveillance • Vous pouvez consulter l'historique des 50 derniers nettoyage nettoyages. • Vous pouvez arrêter le nettoyage et demander au Base Jet Bot de revenir à...
  • Seite 55 Dépannage Symptôme Liste de vérification • Vérifiez que le bouton d'alimentation est activé. • Vérifiez que le voyant d'état est allumé. • Vérifiez si la batterie du Jet Bot est complètement déchargée. - Lorsque le voyant d'état du Jet Bot devient rouge et reste fixe, placez Le Jet Bot ne manuellement le Jet Bot sur la Clean Station pour le mettre en charge.
  • Seite 56: Caractéristiques Techniques De L'appareil

    Puissance (maxi.) de l'émetteur 20 dBm • Par la présente, Samsung Electronics déclare que cet appareil de type équipement radio est en conformité avec la Directive 2014/53/UE. Le texte intégral de la déclaration de conformité de l’UE est disponible à l’adresse Internet suivante : La Déclaration officielle de conformité se trouve sur http://www.samsung.com, rendez-vous sur la page d’assistance >...
  • Seite 57 Caractéristiques techniques de l’appareil Hauteur Clean Station Tension nominale 220-240 V ~ 50-60 Hz Intensité de sortie nominale 25,85 V, 1,0 A Mise en charge 40 W Consommation d'énergie 1 300 W (en cas d'utilisation de la puissance Fonctionnement d'aspiration) Poids 5,0 kg Dimensions...
  • Seite 58: Annonce De Logiciel Open Source

    Cet appareil contient un logiciel open source. Pour obtenir le code source couvert par des licences ayant l’obligation de publier le code source (par ex. GPL, LGPL, etc.), veuillez consulter le site http://opensource.samsung.com/ et effectuer une recherche par nom de modèle.
  • Seite 59: Avertissements Concernant La Batterie

    Avertissements concernant la batterie Ne retirez pas (ou n’essayez pas de retirer) la batterie incorporée dans cet appareil par vous-même. Pour remplacer la batterie, vous devez prendre contact avec votre fournisseur de services ou un professionnel qualifié indépendant. Ces instructions ont été...
  • Seite 61: Manuale Dell'utente

    Jet Bot Manuale dell’utente Serie VR30T85**** • Per consultare il manuale completo, scansionare il codice QR oppure visitare https://www.samsung.com • Prima di utilizzare questo prodotto, leggere attentamente le istruzioni. • Solo per uso in interno.
  • Seite 62 Manuale dell’utente • Per acquistare un contenitore di raccolta della polvere aggiuntivo, verificare prima il nome del modello (VCA-RDB95) ed il logo SAMSUNG ( ) quindi contattare un Rivenditore SAMSUNG Electronics autorizzato o un Centro di assistenza autorizzato SAMSUNG. Italiano...
  • Seite 63: Funzionamento E Manutenzione

    Funzionamento e manutenzione A. Installazione B-2 Avviare la pulizia • Premere [ ] sul Jet Bot per iniziare la pulizia in modalità Automatica. NOTA • Premere [ ] sul Jet Bot per interrompere • Installare la Clean Station in un luogo che la pulizia.
  • Seite 64: Informazioni Di Sicurezza

    • Per ulteriori informazioni sull’impegno • Usare il prodotto solo secondo quanto ambientale di Samsung e sugli obblighi descritto in questo manuale. normativi specifici dei singoli prodotti es. • Non utilizzare il Jet Bot o la Clean Station REACH (WEEE, Batteries) visitare: samsung.
  • Seite 65 Informazioni di sicurezza Clean station Jet Bot • Non modificare la spina polarizzata per • Non aspirare oggetti rigidi, appuntiti o adattarla a una presa non polarizzata o a un taglienti come vetro, chiodi, viti, monete o cavo di prolunga. simili.
  • Seite 66 Informazioni di sicurezza Alimentazione - In caso contrario Jet Bot potrebbe subire danni o funzionare in modo anomalo. AVVERTENZA • Fissare i delimitatori perimetrali nei luoghi dove Jet Bot potrebbe cadere come ad • Evitare qualsiasi rischio di incendio o esempio in cima alle scale o davanti ad scariche elettriche.
  • Seite 67 Informazioni di sicurezza • Seguire queste raccomandazioni per • Non installare la Clean Station vicino a effettuare una ricarica corretta. luoghi di frequente passaggio, vicino ad un ingresso o un passaggio stretto. - Accendere sempre la Clean Station. - Le persone potrebbero inciampare e - Installare la Clean Station in un luogo ferirsi o danneggiare il prodotto.
  • Seite 68 9 cm appoggiati sul pavimento poiché • Per sostituire le batterie, rivolgersi ad un Jet Bot potrebbe urtarli e gli oggetti Centro di assistenza autorizzato SAMSUNG potrebbero rimanere impigliati nella Electronic. spazzola rotante o nelle ruote di guida di - L’uso di batterie di altri prodotti può...
  • Seite 69 Note e precauzioni Installazione - Fare in modo che il Jet Bot sia sempre caricato nella Clean Station (tuttavia spegnere il dispositivo e lasciare la Clean NOTA Station scollegata durante una prolungata • E’ meglio installare la Clean Station lungo la assenza da casa per motivi di lavoro o scanalatura dei pavimenti in legno qualora vacanze).
  • Seite 70 • Se la potenza di aspirazione costantemente • Questa batteria è indicata esclusivamente diminuisce, o il Jet Bot si surriscalda, pulire per un Jet Bot SAMSUNG Electronics. Non il micro filtro della polvere. utilizzarla per altri prodotti o scopi. ATTENZIONE •...
  • Seite 71 App SmartThings La app SmartThings Samsung è disponibile solo • In alternativa, se si dispone di uno nei modelli dotati di una funzione Wi-Fi. smartphone SAMSUNG, aggiungere l’account Se non si dispone di un router Wi-Fi, non è nelle impostazione del proprio smartphone.
  • Seite 72 App SmartThings Funzioni della app SmartThings Classificazione Funzioni Spiegazione • È possibile verificare il risultato dell’ultima pulizia. Monitoraggio Rapporto di pulizia • È possibile verificare la cronologia delle ultime 50 pulizie. • Per interrompere la pulizia e indicare a Jet Bot di A base tornare alla Clean Station.
  • Seite 73: Risoluzione Dei Problemi

    Risoluzione dei problemi Sintomo Checklist • Controllare di aver premuto il tasto di accensione. • Controllare che l’indicatore di stato sia acceso. • Verificare che la batteria di Jet Bot non sia scarica. - Quando l’indicatore di stato di Jet Bot diventa rosso e rimane rosso, Jet Bot non funziona posizionare manualmente Jet Bot nella Clean Station per ricaricarlo.
  • Seite 74: Specifiche Del Prodotto

    Potenza di trasmissione (Max) 20 dBm • Samsung Electronics dichiara che l’apparecchiatura radio aderisce alla direttiva 2014/53/EU. Il testo integrale della dichiarazione di conformità EU è disponibile al seguente indirizzo: La dichiarazione ufficiale di conformità è disponibile su http://www.samsung.com, selezionare supporto>...
  • Seite 75 Specifiche del prodotto Altezza Nome Clean Station Voltaggio nominale 220-240 V ~ 50-60 Hz Corrente uscita nominale 25,85 V – 1,0 A Carica 40 W Consumo elettrico Funzionamento 1300 W (con uso di aspirazione) Peso 5,0 kg Dimensioni L 280 mm x P 400 mm x A 525 mm Tempo operativo Circa 18 secondi Italiano...
  • Seite 76 Il software incluso in questo prodotto contiene codice open source. Per ottenere il codice sorgente coperto da licenze che hanno l’obbligo di pubblicare il codice sorgente (ad es. GPL, LGPL ... ecc.), visitare http://opensource.samsung.com/ e cercare per nome del modello.
  • Seite 77: Avvertenze Sulla Batteria

    Avvertenze sulla batteria Non rimuovere o tentare di rimuovere autonomamente la batteria inserita all'interno del prodotto. Per sostituire la batteria, contattare un tecnico qualificato o il Centro di assistenza autorizzato. Queste istruzioni sono state preparate ad uso esclusivo del tecnico o del centro assistenza. AVVERTENZA PER LA PROPRIA SICUREZZA, NON TENTARE DI RIMUOVERE LA BATTERIA AUTONOMAMENTE NÉ...
  • Seite 78 Promemoria...
  • Seite 79 Promemoria...
  • Seite 80 DJ68-00858C-00...

Diese Anleitung auch für:

Jet bot vr850004.00.2133

Inhaltsverzeichnis