Assigning Preset 1-3 - Canton Sound M Kurzanleitung

English

ASSIGNING PRESET 1-3

The Sound M is able to assign 3 memory buttons with „presets". Settings like
volume, selected input and settings in the Speaker Setup [SPS] menu (sound
settings etc.) can be stored.
Practical tip:
We recommend you to store the settings you have made in the loud-
speaker menu during the initial set-up of the Sound M, e.g. regarding
loudspeaker levels and distances, sound settings etc., to one of the 3
preset buttons so that your settings are not overwritten by the (neutral)
factory settings if you accidentally press one of the preset buttons.
To store resp. recall (sound)settings, please proceed as follows:
Please apply the desired settings regarding volume, sound, input etc. and
1
press and hold the memory button „1", „2" or „3" until the corresponding
number [P1], [P2] or [P3] is shown in the display and no longer flashes.
To recall the settings from these presets, please press the corresponding
2
button „1", „2" or „3" briefly. The settings are then called up.
Note:
To delete the settings from a preset button, please press and hold the
relating button for 10 seconds until the corresponding preset [P1], [P2] or
[P3] is shown in the display rapidly flashing.
Note:
The Sound M contains a multitude of other great functions.
All settings can be found in the detailed instruction manual.
This can be found under: www.canton.de/manual/soundm
36