Required Materials; Preparing For Use - miethke proSA FV790T Gebrauchsanweisung

EN
CAUTION
It is absolutely essential that only the proSA
Tools are used to determine, change and
monitor the opening pressure of the gravi-
tational unit of the proSA.
If the proSA is combined with an adjustable
differential pressure unit (proGAV), proGAV
Tools must be used to adjust and check
the adjustable pressure level of the proGAV
valve.

3.04.03 REQUIRED MATERIALS

proSA
proSA Verification Tool
Verification Compass
Adjustment Tool
proSA Masterdisc
proSA
proSA Checkmate

3.04.04 PREPARING FOR USE

Checking the sterile packaging
mate
Checking the integrity of the proSA Tools
proSA
proSA
proGAV Adjustment Disc
proSA Check-
3.04.05 USING THE INSTRUMENTS
proSA
1. Localisation
Fig. 6: Localisation of the adjustable Gravitational Unit
2. Test procedure
NOTE
The proSA Verification Tool and the proSA
Verification Compass react sensitively to
external magnetic fields. In order to rule
out unwanted interactions, the proSA Adjust-
ment Tool should not be placed in the imme-
diate vicinity of the proSA Verification Tool or
the proSA Verification Compass when deter-
mining the opening pressure. We recom-
mend a distance of approx. 30 cm.
2a. Testing with the proSA Verification Tool
WARNING
The Verification Tool must be centred over
the valve if possible, otherwise the deter-
mined opening pressure may be incorrect!
Verification Tool
proSA ®
Verification Tool
Tools