General Usage - Bell & Ross BR03-93 GMT Technische Anweisung

BR 03-93 GMT
BR-CAL.303
Movement : mechanical with automatic winding. Ref: BR-CAL.303. Power reserve
of approximately 40 hours. Functions : hours, minutes, seconds and date with
quickset. Second time zone display with a 24-hour scale. Time-setting with hacking
function. Case : 42 mm in diameter.
4

GENERAL USAGE

When the watch has stopped (crown in position 0): wind the
Starting the watch.
movement by rotating the crown clockwise. After approximately 40 rotations, the
watch is fully wound (the winding mechanism does not have a stop to prevent over-
winding). The power reserve is approximately 40 hours when fully wound. When
the watch is worn , the automatic mechanism will wind the movement.
Setting the time. Pull the crown out to position 2. The seconds hand will stop,
enabling you to set the time to the nearest second. Set the time by rotating the
crown in the required direction.
All manuals and user guides at all-guides.com
. (crown in position 1): turn the crown clockwise in
Setting the second time zone
order to move the hand for the second time zone (C) to the desired section on the
graduated bezel (F).
Quickset* (crown in position 1): pull the crown out to position
Setting the date.
1 and set the date by rotating the crown anticlockwise. Slow setting (crown in
position 2): to ensure the date changes at midnight rather than noon, it is recom-
mended you set the date by adjusting the hands of the watch. Pull the crown out
to position 2 and turn the hands until the date changes. Then set the precise time.
A. Minute hand
B. Hour hand
C. Hand for the second time zone
D. Seconds hand
E. Case attachment screws
(NEVER UNSCREW)
F. 24H graduated bezel
G. Date
H. Strap attachment
I. Crown
A
B
C
D
E F
(x4)
0. Wind the movement manually (rotate clockwise).
1. Set the second time zone (rotate clockwise)
Set the date (rotate anticlockwise)
2. Set the time (rotate in either direction)
0 1 2
I
H
G