General Usage - Bell & Ross BR S QUARTZ Technische Anweisung

BR S QUARTZ
BR-CAL.102
Movement : quartz. Calibre BR-CAL.102. Functions : hours, minutes, seconds* and date*. Time-setting
with hacking function. : 39 mm diameter.
Case

GENERAL USAGE

the watch starts running once the battery has been fitted.
Starting the watch:
Pull the crown out to position 2. The seconds hand will stop, enabling you to set the
Setting the time.
time to the nearest second. Set the time by rotating the crown in the required direction.
(crown in position 1): pull the crown out to position 1 and set the date by rotating the
Setting the date.
crown anticlockwise. Slow setting (crown in position 2): to ensure the date changes at midnight rather
than noon, it is recommended you set the date by adjusting the hands of the watch. Pull the crown out
to position 2 and turn the hands until the date changes. Then set the precise time.
IMPORTANT
*Quickset date setting. As with all watches with a date function, quickset date setting (crown in posi-
tion 1) MUST NOT UNDER ANY CIRCUMSTANCES be carried out between the times of 9 P .M. (21:00)
and 3 A.M. (03:00).
Water resistance. Once the watch is set, to ensure perfect water resistance, push the crown back to
position 0. Never operate the crown underwater.
Note: The 4 slotted screws (D) mount the bezel to the case and ensure the water resistance of the
watch. To benefit from the Bell & Ross warranty, these screws must never be unscrewed.