Technical Notes; General Description; General Usage - Bell & Ross BR01-92 HORIZON Technische Anweisung

BR 01-92 hoRizon
999-piece limited edition
Te c h n i c a l N o t e s
The BR 01 HORIZON watch is inspired by aircraft cockpits, where each part is a
reference in terms of legibility, reliability and performance. The display of the BR 01
HORIZON recalls the graphics of the reference instrument, the artificial horizon.

GEnERAL DESCRiPTion

Mechanical movement with automatic winding. 21 jewels. 28,800 beats per hour.
Working reserve of about 40 hours. High-precision adjustment in 4 positions (toler-
ance of 0/+10 seconds per day).
46 mm. Thickness: 10.5 mm. Glass bead blasted steel with black PVD finish (Physical
Vapor Deposition). Screw-in crown (F).
coating. : 100 meters.
Water-resistance
fabric.

GEnERAL USAGE

To unscrew the crown (F) in position 0, turn it counterclockwise.
the watch has stopped , unscrew the crown until it is in position 1, then wind the
mechanism by turning the crown clockwise. After about 40 rotations, the watch
is fully wound (the mechanism has no stop in order to keep the winder from being
wound too tightly). The operating time is then about 40 hours. When the watch is
being worn , winding takes place automatically.
the crown into position 3. Set the time by turning the crown in the desired direction.
DiSASSEMBLinG ThE 2 STRAP FASTEnERS AnD ThE STRAP
The case of your watch has 3 main parts:
Assembly 1: the main body of the case with the crown (F)
Assembly 2: the "cover" of the case with its 4 screws (D)
Assembly 3: the 2 strap fastenings (E)
A A A
B B B
C C C
D D D
(x4) (x4) (x4)
A. Minute hand (white section)
B. Hour hand
C. Minute hand counterweight (black section)
D. Case attachment screw
(NEVER UNSCREW)
E. Strap fastening or part for attaching the strap to the case
F. Crown
G. Screw for attaching the strap to its fastening
H. Screw for attaching the fastening to the case
I.
Screw to access button for disassembling the crown
0. Unscrew the crown (counterclockwise)
1. Wind the mechanism manually (clockwise)
2. Neutral position or intermediate notch
3. Set the time (either clockwise or counterclockwise)
4. Unscrew the 4 screws (G) to remove the strap (counterclockwise)
5. Unscrew the 4 screws (H) to remove the strap fasteners (E) (counterclockwise)
Functions : hours, minutes. XL Case
: sapphire crystal with anti-reflective
Glass
in rubber or heavy-duty synthetic
Strap
Winding
. Unscrew and pull
Setting the time
0 0 1 1 0 2 2 1
F F
E E
(NEVER UNSCREW)
These 3 parts are assembled by two types of screws visible on each side of the case:
The 4 slotted-head screws (D) are used to fix the cover to the body of the case and
to seal the watch.
these screws must never be undone).
The 8 socket-head screws (G and H) (hexagonal recess/1.3 mm in diameter) are
used to attach the strap to the fastenings and the strap fastenings to the case.
These screws can be handled carefully using the 2 special tools supplied with the
watch in its box.
. Diameter:
iMPoRTAnT
Once the time has been set, screw the crown back down to ensure a perfect seal. To
do this, push the crown until it is in position 0 by simultaneously turning it clockwise.
The crown must never be handled underwater.
CARE
. When
After being immersed in seawater, it is recommended to always rinse off the watch
and its strap with fresh water. We also recommend that you check that your watch
is still watertight every two years. In order to guarantee service compliant with
the brand's requirements, any servicing on your watch must be carried out by the
Bell & Ross repair center or by a watchmaker approved by Bell & Ross. For any
repairs under warranty, you will need to present the Bell & Ross warranty card, duly
dated and signed by the retailer at the time of purchase.
3 3 3
3 3 2 3
F
E
The Bell & Ross international guarantee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making
industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the
Bell & Ross approved retailer on the international guarantee certificate subject to applicable laws and/or legal
guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing,
brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an
approved after-sales service center.
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific
nature of these items.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by
approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly
completed, dated and signed by an approved retailer.
Models and Technical features subject to change
(Warning: so as not to invalidate the Bell & Ross warranty,
G G G
(x4) (x4) (x4)
5 5
H H H
(x4) (x4) (x4)
LIMITED EDITION LIMITED EDITION
BR 01-92-SHO-000/999 BR 01-92-SHO-000/999
I I I
5
LIMITED EDITION
BR 01-92-SHO-000/999