Folding Instructions - grabner SPEED Eignerhandbuch

RaNGER / RaNGER SL
►
Remove the knurled nuts of the seat-
boards (accessories) and insert them
from underneath into the seat-board eye-
lets, fasten the nuts.
IMpORTANT: short seat-board forward
and long seat-board aft
►
Screw the motor-bracket (accessory) on
the stern reinforcement-strakes.
►
Fasten safety line to the eyelet lip on the
port- and starboard side.
FaMILY / HObbY
►
Remove the knurled nuts of the seat-
boards (accessories) and insert them
from underneath into the seat-board eye-
lets, fasten the nuts.
►
Fasten hand-holds to the eyelet lip on the
port- and starboard side.
►
Now only inflate your boat to full opera-
ting pressure (0.3 bar).
►
Cover the valve with the valve cap (ba-
yonet cap).
All manuals and user guides at all-guides.com
DISMANTElING
►
Choose clean ground for dismantling and
packing.
►
Remove all loose parts from the boat
(bow dry bag, sun awning, personal
items, ...)
►
Deflate the boat.
►
Remove the seats and the motor-bracket
( )
RaNGER
►
Clean and dry your boat and the acces-
sories to avoid damage by grit!
►
Check your boat for possible damage,
and repair such as soon as possible, rea-
dy for next use!

FOlDING INSTRUCTIONS

►
Roll up the boat from stern to bow (di-
rection towards valves) so as to allow
discharge of air.
SPEED
►
Unroll and place the boat flat on the
ground, the eyelet studded coaming
should meet in the middle.
►
Place the transom-panel inside and flap
the stern-cones over the transom-panel.
►
Fold sides inward so that they form one
line lengthwise.
11