ArteVino oxygen OXG1T230NPD Gebrauchsanweisung Seite 29

To set the temperature of your wine cabinet
The temperature of your wine cabinet is set entirely from the control panel.
Single-temperature cabinets:
Press and hold down the SET button for a few seconds until the set temperature (ST1) flashes.
•
The default temperature setting is 12°C (ideal maturing temperature). However, the temperature
can be set from 9°C - 15°C.
• The recommended temperature setting range for wine storage is 10°C - 14°C.
• Set the desired temperature using the
Confirm your setting by pressing the SET button. If you do not confirm by pressing this
•
key, the change in temperature setting will not take effect.
Your wine cabinet must be placed in a room with a temperature of 0°C - 35°C for solid door and 0°C
- 30°C for Glass door.
2 temperatures model:
BEVERAGE CENTER COMPARTMENT (BOTTOM):
Press and hold the SET button for a few seconds until the SET temperature (ST1) flashes.
•
The default temperature setting is 3°C. However, the temperature can be set from 3°C to 6°C
• Set the desired temperature using the
Maintain pressure on the SET button for a few seconds. This confirms the temperature
•
setting of the lower compartment of the cabinet (Beverage center) and allows you to access
the temperature setting (ST2) of the upper compartment (aging compartment).
AGING COMPARTMENT (TOP):
• The default temperature is 12°C . However, the temperature can be set from 10°C à 14°C
• Set the desired temperature using the
• Confirm your setting by pressing the SET button. If you do not confirm by pressing this key,
the change in temperature setting will not take effect.
Your wine cabinet must be placed in a room with a temperature of 12°C - 25°C.
3-temperature cabinets:
ZONE IN THE CENTRE OF THE CABINET OR MATURING ZONE:
Press and hold down the SET button for a few seconds until the set temperature (ST1) flashes.
•
The default temperature setting is 12°C (ideal maturing temperature). However, the temperature
can be set from 10°C - 14°C.
• Set the desired temperature using the
Maintain pressure on the SET button for a few seconds. This confirms the temperature setting
•
in the maturing zone and allows you to access the temperature setting of the red wine service
zone (ST2).
RED WINE SERVICE ZONE:
• The default temperature setting is 18°C. However, the temperature can be set from 15°C - 20°C.
• Set the desired temperature using the
Confirm your setting by pressing the SET buttons. If you do not confirm by pressing this key, the
•
change in temperature setting will not take effect.
N.B.: the temperature of the lower compartment (chilling compartment) results from the temperature set in the
maturing zone. The temperature gradient between these zones is 4 - 6°C.
N.B.: to function correctly, your cabinet must be placed in a room with a temperature of 12 - 30 °C.
Multi-temperature cabinets:
LOWER ZONE:
Press and hold down the SET buttons for a few seconds until the set temperature (ST1) flashes.
•
The default temperature setting is 8°C. However, the temperature can be set from 6°C - 10°C.
• Set the desired temperature using the
Maintain pressure on the SET buttons for a few seconds. This confirms the temperature setting
•
in the lower zone of the cabinet and allows you to access the temperature setting of the upper
zone (ST2).
and buttons.
and buttons.
and buttons.
and buttons.
and buttons.
and buttons.
GB
13