Herunterladen Inhalt Inhalt Diese Seite drucken

Loading And Layout Advice; Installing A Shelf In Storage Version - ArteVino oxygen OXG1T230NPD Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für oxygen OXG1T230NPD:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 34

Loading and layout advice

Recommendation
We strongly recommend that you do not leave your wine bottles:
- Wrapped in tissue paper inside your EuroCave wine cabinet. Tissue paper does not tolerate ambient
humidity in the long-term. The saturated paper will stick to your bottle labels and damage them.
- Stored in cardboard packaging or a wooden case in your EuroCave wine cabinet, in order to encourage
maximum air flow around the bottles and prevent the packaging from deteriorating, which could
eventually contaminate your wine bottles.
Each shelf can be used as a storage shelf, sliding shelf or display shelf. The shelves in your cabinet have 12
recesses, allowing your bottles to be stored safely.
Schéma 1
Diagram 1
Schéma 2
Diagram 2
N.B:
For optimal use of your storage shelf, attach the rubber studs to the rear of the shelf, one on the
left, the other on the right, ensuring that no bottles touch the back wall.
10
1
2
3
Shelf specially developed for wine cabinets in the Oxygen range.
14 dowel pins supplied in the accessories bag.

Installing a shelf in storage version:

To install bottles on a storage shelf, proceed as follows:
1.
position one runner on the right and one runner on the left (see
diagram 1). Ensure that the runners are correctly fixed in their
housing (see diagram 2)
2.
3.
located at the front of the shelf, in the upper section.
These pins then fix the shelf with respect to the runner and prevent
any unwanted movement.
4.
the base of the bottle towards the back.
5.
the front row.
6.
the back wall.
7.
of 12 bottles, i.e.72 traditional Bordeaux bottles
kg).
Diagram 3
1
2
3
Insert 2 runners in the shelf support strips. For each shelf,
Place the shelf in the 2 runners. (see diagram 3)
Place a locking dowel in each of the 2 holes
Start by placing bottles in each recess of the back row with
Continue by placing the bottles in the opposite direction on
Continue stacking the bottles, ensuring that no bottles touch
A storage shelf can support a maximum of 6 rows
Runners (x2)
Shelf - 12 recesses
Dowels (x2)
(97

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis