1 Key To Symbols - Orbea OC Serie Technisches Handbuch

4 | OC
This technical manual contains important information about your OC wheels re-
garding their use, maintenance, and spare parts. Please read it carefully before
This document is a supplement to the General User Manual for Orbea bikes and
components, which describes in greater detail the proper use and adjustments
for general bike components to ensure safe operation. You can view and down-
load the User Manual from our website.
For proper use, maintenance, and characteristics of components from other
manufacturers that are mounted on our wheels, such as hubs, consult the man-
ufacturers' websites or their respective distributors in your country.
If you are mounting your OC wheels on one of our bike models, remember to
consult the manual for your Orbea bike, which can be found on our website:
www.orbea.com/gb-en/support/manuals/
TECHNICAL MANUAL OC W HEELS

0 1 KEY TO SYMBOLS

Throughout this technical manual, various symbols are used to detail instruc-
tions and warnings for use, maintenance, and assembly. Pay attention to these
symbols to avoid dangerous situations and ensure the correct use and assem-
bly of all components.
The meaning of these symbols is explained below. In this manual, the sym-
bol may be accompanied only by the relevant instruction for the component
it describes.
Read the following information carefully to understand its meaning.
The DANGER and WARNING symbols always pose a risk of
accident if steps are not taken to avoid the situation they
describe. An accident while riding a bike can always carry
the risk of serious injury or even death. The risk of death
will not always be repeated in this manual when these
symbols appear, as the risk is detailed here.
TOOLS
DANGER: Dangerous situation will result in
death or serious injury if ignored.
WARNING: Dangerous situation could result
in death or serious injury if ignored.
TIGHTENING TORQUE:
ATTENTION: Dangerous situation could
torque (in newton meter) is indicated below the symbol of
result in minor or moderate injury if ignored.
the tool to be used for the element it describes.
Issue not related to physical injury. Relevant
information.
OC | 5
FIXED SPANNER TORX WRENCH
PHILIPS
ALLEN WRENCH
SCREWDRIVER
The respective key number is
6 6
indicated inside the symbol
10 N.m
The corresponding tightening
EN