Freeze Function - Hitachi CP-S860W Bedienungsanleitung

Basic operations (continued)

Freeze function

This function is used to freeze the image being displayed.
This function can be used together with the MAGNIFY function
(refer to page 10).
1
Press the FREEZE button.
• The image being displayed will freeze.
• The [ ] mark will be displayed for approximately 3 sec. when the FREEZE function is on.
Cancelling the FREEZE function
1
Press the FREEZE button.
• The FREEZE function will be cancelled.
• The [ ] mark will be displayed for approximately 3 sec. when the FREEZE function is cancelled.
Caution
• Pressing the FREEZE button alternately turns the freeze function on and off.
• The FREEZE function will be cancelled when the input select button is pressed or the display
mode of the PC being used for display is changed.
• The POSITION icon is not displayed while the FREEZE function is being used. The screen cannot
be moved with DISK PAD.
• When a still image signal is input when the FREEZE function is on, make sure not to forget to
cancel the FREEZE function.
• Cancelled when the menu display is turned on during freeze operation.
All manuals and user guides at all-guides.com
VIDEO RGB
LASER
STANDBY/ON POSITION
RESET
MENU
FREEZE
MAGNIFY VOLUME
1
OFF
P in P MUTE
BLANK AUTO TIMER