Remote Control Transmitter - Hitachi CP-S860W Bedienungsanleitung

Names and functions of each part (continued)

Remote control transmitter

VIDEO, RGB button
Press to switch the input. (Refer to page 13, 19.)
STANDBY / ON button
Used to turn the power on and off.
Press for 1 sec. or more to turn the power off
(enter standby status).
(Refer to pages13 and 14.)
DISK PAD
(1) Used to select menu items when the menu
screen is displayed (refer to page 16-18).
(2) When the menu is not displayed, the mouse
shift function and left click function are active.
*1
(3) After the POSITION button has been
pressed, the screen can be moved upward,
downward and to the left and right.
MENU button
Used to turn the menu screen display on and off.
(refer to page 17-21).
MAGNIFY button
Used to magnify the displayed image.
P in P button *2
Used to turn P in P (Picture In Picture: displays sub video
signal images in the RGB signal) on and off.
Each time this button is pressed, operation will change in
the following sequence:
(1) Reduce sub screen (2) Magnify sub screen (3)Off.
(1) ∼ (3)
BLANK button
Used to turn blanking on and off.
(Refer to page 20.)
FOCUS button
Used to adjust the focus of the image on the
screen. (Refer to page 13.)
*1 POSITION icon
When the POSITION button is pressed, the remote control
buttons will light and the moving display icon will appear at the
bottom right of the screen.
*2
With the P in P function, signals are input to both RGB and
VIDEO. This function operates only when the RGB signal has
been selected. There is no display in the case of the no signal and
when the RGB signal is outside the sync range.
When P in P is used, audio is automatically switched to video.
In P in P, audio input can be switched by pressing the VOL
VOL keys of the remote control, displaying the audio bar and
moving Disk Pad left and right during the display.
All manuals and user guides at all-guides.com
VIDEO
LASER
STANDBY/ON
MENU
FREEZE
MAGNIFY
P in P
BLANK
FOCUS
and
R G B / V I D E O
LASER button
Turns the laser beam on and off. Refer to page
RGB
11 cocnerning usage and observe the cautions.
POSITION
POSITION button
Pressing the top, bottom, left or right of Disk Pad
after pressing this button causes corresponding
movement (effective only for RGB signal output).
RESET MOUSE / RIGHT button
(1)Operates as the RESET button when the menu
is displayed. Press this button to return to the
RESET
initial settings.
(2)Used to click the right mouse button when the
menu is not displayed (refer to page 25,26).
*1 (3)Pressing this button after scrolling the screen
with POSITION returns the screen to the original
VOLUME
position.
OFF
FREEZE button
MUTE
Used to turn the freeze (still) image display on
AUTO TIMER
and off.
VOLUME button
Adjusts the volume of the sound. Press [
ZOOM
increase the volume and (
volume.
MUTE button
Mutes the sound when pressed and restores the
sound when pressed again.
TIMER button
Turns the time display of the timer displayed on
the menu screen on and off.
The timer is not displayed during blanking.
Refer to page 20, 21 concerning the method
used to set the timer.
ZOOM button
Used to adjust the size of the image. (Refer to
page 13.)
AUTO button
Used to execute auto-adjust.
*3 Auto adjustment function
The projector automatically adjusts 4 items (V. POSIT, H. POSIT,
H. PHASE, H. SIZE).
When you choose AUTO (move the cursor to the right from the
manual operation position), the AUTO confirmation menu shown
below is indicated.
Caution • Auto adjust requires several tens of seconds.
• Auto adjust may not operate correctly in some cases,
depending on the computer connected and the signal.
• Auto adjust may not operate correctly in some cases,
depending on the type of image.
• Execute auto adjust with the display of the application
being run by the computer at maximum.
• After auto adjust, the image may be slightly dark in
some cases due to automatic adjustment of the signal
level.
• Auto adjust canot execute when the initial display is
"NO INPUT IS DETECTED" or "SYNC IS OUT OF
RANGE" during FREEZE or MAGNIFY.
] to
) to decrease the
*3