Herunterladen Inhalt Inhalt Diese Seite drucken

How To Delete The Self-Destruct Pin; How To Unlock With The Self-Destruct Pin - iStorage DISKASHUR M2 Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für DISKASHUR M2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 76

23. How to Delete the Self-Destruct PIN

To delete the Self-Destruct PIN, first enter the "Admin Mode" as described in section 5. Once the drive is in Admin Mode (solid
LED) proceed with the following steps.
1. In Admin mode, press and hold down both
SHIFT (
) + 6 buttons
2. Press and hold down SHIFT (
Note:
To immediately exit Admin Mode (solid
solid
BLUE
LED switches to a solid

24. How to Unlock with the Self-Destruct PIN

Warning:
When the Self-Destruct mechanism is activated, all data, the encryption key and the Admin/User PINs are
deleted. The Self-Destruct PIN becomes the User PIN. No Admin PIN exists after the Self-Destruct mechanism is
activated. The diskAshur M
order to configure an Admin PIN with full Admin privileges including the ability to configure a new User PIN.
When used, the self-destruct PIN will delete ALL data, Admin/User PINs and then unlock the drive. Activating this feature will
cause the Self-Destruct PIN to become the New User PIN and the diskAshur M
be added to the drive.
To activate the Self-Destruct mechanism, the drive needs to be in the standby state (solid
steps.
1. In Standby State (solid
down both the SHIFT ( ) + KEY ( ) buttons
2. Enter the Self-Destruct PIN and press the
KEY ( ) button
) + 6 buttons again
LED), press and hold down the SHIFT ( ) button for a second - the
BLUE
RED
LED.
will need to be reset (see 'How to perform a complete reset' Section 35, on page 26) first in
2
RED
LED), press and hold
Solid
Blinking
change to a solid
Self-Destruct PIN was successfully deleted
will need to be formatted before any new data can
2
RED
LED switches to all LEDs, RED,
BLUE
RED,
to
GREEN
a few seconds and finally shifts to a solid
LED indicating the diskAshur M
self-destructed
www.istorage-uk.com
BLUE
LED will change to a blinking
RED
LED will become solid and then
BLUE
LED indicating the
RED
LED) and then proceed with the following
blinking on and off
GREEN
and
BLUE
blinking LEDs will change
and
BLUE
LEDs alternating on and off for
has successfully
2
BLUE
RED
LED
GREEN
&
GREEN
#19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis