Tv Operation Using A Remote Control; Programming The Universal Remote Control - Samsung SMT-C7200/E Bedienungsanleitung

Inserting Batteries in the Remote Control
Alkaline batteries (not standard batteries) should be used for the remote control
to prolong its life span. Using standard batteries, may cause problems when
using the remote control.
- Two identical new batteries should be used for the remote control.
- Remove the batteries when a remote control is not used for a long time.

TV Operation using a Remote Control

You can operate a TV with the remote control.
- Standby/Wake up
- Turn volume up/down, Mute
- Change channels
- Navigation arrows, OK confirmation
- Access TV menu (

Programming the Universal Remote Control

Check the 'TV manufacturer number' section in the Appendix to find the
1
relevant 4-digit TV manufacturer number and turn on the TV.
Press and hold the TV (
2
button together for a minimum of 3 seconds until the LED flashes twice.
Enter the 4-digit code for your TV or the 4-digit code universal code
3
number by pressing each digit button in sequence within 10 seconds of
releasing the previous button.
With the first 3 digits, the LED will flash briefly. On the 4th digit, the LED will
flash twice if the code entered is a valid code.
- If you cannot find your TV in the code list, please use code number 0000 in step 3 and
press the Standby button until the TV turns off. This will trigger a search through all
codes available in the remote irrespective of the brand and takes some time.
)
) button and the Programm ( )
13
English _