Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cable Cover
Installing the Cable Cover
1�
Align the left and right hinges of the cable cover onto the bottom rear of the display�
2�
Snap on the top section of the cable cover to the aligning clips�
3�
With your fingers, turn the thumbscrews clockwise to tighten and lock the cable cover onto
the display�
Removing the Cable Cover
1�
With your fingers, turn the thumbscrews counterclockwise to loosen�
2�
Once the thumbscrews are completely loosened, pinch the left and right clips and pull the
cable cover towards you�
3�
Remove the cable cover from the left and right hinges�
9
Werbung
Kapitel
Fehlerbehebung
