6.2. Charging the battery via USB
You can charge the battery either using the USB mains adapter
supplied or via a USB connection on your PC or another device
with a USB connection.
Connect the USB cable to the camera.
Use the USB cable to connect the camera to the USB port on
your PC or another device with a USB port.
The operating LED on the camera will flash during the charging
process. The operating LED will go out once the battery is fully
charged. If the operating LED flashes quickly, check the battery
and connections and switch the camera on again.
If the operating LED still flashes quickly, please contact our Ser-
vice Hotline.
396 of 480