AEG CDE84779XB Benutzerinformation Seite 26

26 www.aeg.com
Problem
The flexible induction
cooking area does not
heat up the cookware.
The indicator above the
symbol
The control bar blinks.
The control bar blinks
twice and turns off.
The control bar for hood
blinks and the hood does
not start or turns off.
Possible cause
The cookware is in a wrong
position on the flexible induc‐
tion cooking area.
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Child Safety Device or Lock
operates.
comes on.
There is no cookware on the
zone or the zone is not fully
covered.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
FlexiBridge (Flexible Bridge)
operates. One or more sec‐
tions of the function mode
which operates are not cov‐
ered by the cookware.
PowerSlide operates. Two
pots are placed on the flexi‐
ble induction cooking area or
the cookware covers more
than one cooking area acti‐
vated by the function.
The fan may turn off by itself
in certain conditions, e.g.
when the room is not proper‐
ly ventilated.
Remedy
Place the cookware in the cor‐
rect position on the flexible in‐
duction cooking area. The po‐
sition of the cookware de‐
pends on the activated func‐
tion or function mode. Refer to
"Flexible induction cooking
area".
Use cookware with a diameter
applicable to the activated
function or function mode. Re‐
fer to "Flexible induction cook‐
ing area".
Refer to "Daily use".
Put cookware on the zone so
that it fully covers the cooking
zone.
Use cookware suitable for in‐
duction hobs. Refer to "Hints
and tips".
Use cookware with correct di‐
mensions. Refer to "Technical
data".
Place the cookware on the
correct number of sections of
the function mode which oper‐
ates or change the function
mode. Refer to "Flexible induc‐
tion cooking area".
Use only one pot. Refer to
"Flexible induction cooking
area".
Open the window (you may
need to install the window
switch, refer to "Hints and Tips
for the Hood"). Press any sym‐
bol. The hood operates again.