Herunterladen Diese Seite drucken

Pfaff Varimatic 6086 Bedienungsanweisung Seite 38

Werbung

Knopflochnähen
Schiene bis zum Anschlag nach vorne
zehen.
1 Erste Raupe in der gewünschten
Lange nähen. Nadel hochsteilen.
2 Taste B tippen und festhalten, 4 bis
6 Riegelstiche nähen. Den Stoff dabei
festhalten. Nadel hochstellen. Taste
loslassen.
3 Taste A tippen. Zweite Raupe in der
gleichen Lange wie die erste nähen.
Nadel hochstellen.
4 Taste B tippen und festhalten, 4 bis
6 Riegelstiche nähen. Den Stoff dabei
festhalten. Nadel hochstellen. Taste
loslassen.
5 Einige Vernähstiche nähen. Den Stoff
herausnehmen. Einlauffaden anziehen
und abschneiden.
6 Knoptloch aufschneiden.
Es empfiehlt sich, vor dem Nähen der
Knopflöcher in das Kleidungsstuck, em
Probeknopfloch zu nähen.
Sewing buttonholes
Pull the bottom of the buttonhole foot
forward as far as it will go.
1 Sew first buttonhole seam. Raise the
needle.
2 Push button B until 4 to 6 bartacking
stitches are sewn, holding the work-
piece fast. Raise the needle. Then
release the button.
3 Push button A. Sew the second but
tonhole seam the same length as the
first. Raise the needle.
4 Push button B until 4 to 6 bartacking
stitches are sewn, holding the
material fast. Raise the needle.
Then release the button.
5 Sew a few tying stitches. Remove
the fabric, pull the filler cord taut and
trim.
6 Cut the buttonhole open.
Before sewing buttonholes in the gar
ment it is recommended to sew a but
tonhole as a test.
I-
N
32

Werbung

loading

Diese Anleitung auch für:

Varimatic 6089