CORE SLC Bedienungsanleitung Seite 17

ASSEMBLY/
MASTBASE-BOARD CONNECTION
Items needed: 4x M8x30mm Screw, 4x
M8 T-Nut
Assemble the M8 screw and T-nut first. Then
insert the T-nuts into the tracking system
MASTBASE-BOARD
CONNECTION TRIM
Assemble the mast base on the recom-
mended "Center" mark initially. If you want
less lift on your front foot, slide the Mast base
back. If you want more lift on your front foot,
slide the mast base forward.
en
as shown. Then, put on the assembled Foil
structure and slide the screws into the coun-
tersunk holes. Then, tighten the screws with
the enclosed tool.
15