Sartorius Stat-Pen YSTP01 Betriebsanleitung

Manual
Sartorius Stat-Pen YSTP01
Purpose
Stat-Pen is an anti-static device that uses positive and negative
ions to neutralize electrostatic charges, called static electricity.
When Stat-Pen is activated, it neutralizes all static electricity
toward which the probe is pointed.
Operation
Stat-Pen consists of a neutralizing probe that is connected to a
power supply unit. The power supply unit has an On/Off switch on
the top. When the switch is on, the power supply unit is in the
standby mode. In addition, two red LEDs light up when the power
is on. The probe itself looks like a pen that you hold in your
hand..
Point the probe toward the object on which you want to
neutralize static electricity, and press the microswitch on the probe
to activate it. You should hold the probe preferably at a distance
of 30 – 50 mm from the object before you activate the
microswitch. When the probe is activated, it starts neutralizing at
once. You can also see that it is activated just by looking at the
two LEDs. When the probe is activated, the LEDs are brighter. As
soon as you release the microswitch on the probe, the power
supply unit returns to the standby mode and the probe is
discharged automatically. When the probe is not in use, it should
be kept in the holder on the side of the power supply unit.
The graph shows the speed of neutralization as a function of the
distance of the probe from an object. The time given in seconds is
the time it takes Stat-Pen to reduce the charge on the object to
be weighed from 1,000 volts to 100 volts.
! Warning: Do not touch the probe!
Specifications
Power requirements: > 100 V AC
Neutralization: down to +/- 30 V
Power consumption: 0.1 W
Temperature range: -20 – +40 degrees Celsius
Dimensions: 120 x 120 x 55 mm
IP protection
acc. to EN60529: IP60