Data Robotics Drobo Gebrauchsanweisung Seite 42

All manuals and user guides at all-guides.com
DroboShare
Q. Can I use DroboShare with Drobo S?
A. No, DroboShare only works with 1
not compatible with Drobo S.
Q. I'm using my Drobo with DroboShare. Why does Drobo Dashboard
not see my Drobo?
A. First, check to make sure you have the latest Drobo Dashboard and
Drobo firmware (version 1.1.0 or greater). Next, check to make sure
DroboShare has been assigned an IP address on your network. This is
required to share DroboShare on your network. If DHCP is available
when DroboShare is first powered on, it should receive an IP address
automatically from the local DHCP server and Drobo Dashboard will
detect it. If DHCP is not available, DroboShare will be assigned the
default 169.254.213.234 IP address. This could happen, for example,
if you are using static IP addressing on your network. If this happens,
you will have to first locate a computer connected to the same
network as your DroboShare, install Drobo Dashboard on that
computer, and then configure the IP address on that computer to be
in the same subnet as your DroboShare. Drobo Dashboard should
discover your Drobo and DroboShare and you will be able to assign
your desired static IP address for DroboShare in the DroboShare
settings of Drobo Dashboard.
Finally, check to see if your firewall is blocking Drobo Dashboard.
Firewalls can disrupt the Drobo Dashboard discovery of DroboShare.
Drobo Dashboard needs to be listed as an exception when using a
firewall. The Windows firewall should prompt you when you first
start Drobo Dashboard, asking to unblock and allow. Please select
this option or manually configure this exception. This behavior is also
true of other 3rd party firewalls. Note: Some VPN and ISP related
applications come with an embedded firewall. You must uninstall or
configure these to treat Drobo Dashboard as an exception. Please
visit the knowledge base at
further information.
Q. When using DroboShare, why are my folder or file names changed
or "Corrupted"?
A. This is not specific to DroboShare but is specified by the Windows
File Sharing (SMB) protocol, which the DroboShare uses. This
happens due to the use of invalid folder or filenames, such as ones
st nd
and 2 Generation Drobo. It is
http://www.drobo.com/support/ for
33