Safety And Warranty - Data Robotics Drobo Gebrauchsanweisung

All manuals and user guides at all-guides.com

Safety and Warranty

Safety
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some
installation and operational precautions of which you should be particularly aware.
Please read these instructions before operating Drobo, DroboPro, DroboElite or DroboShare and save them for future
reference.
1. Read all instructions: All safety & operating instructions should be read and understood before operation.
2. Retain instructions: The safety and operating instructions should be retained for future reference.
3. Heed Warnings: All warnings on the appliance and in the operating instructions should be followed.
4. Follow Instructions: All operating and usage instructions should be followed.
5. Drobo, DroboPro, DroboElite, and DroboShare are to be used with UL Listed ITE Equipment only.
6. Avoid Water and Moisture: Drobo, DroboPro, DroboElite, and DroboShare should not be used near water (for
example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool).
7. Provide Adequate Ventilation: Drobo, DroboPro, DroboElite, and DroboShare should each be situated so that its
location or position does not interfere with its proper ventilation. For example, Drobo should not be situated against a
surface that may block the ventilation openings or placed in a built-in installation such as a bookcase or cabinet that
may impede the flow of air through the ventilation openings. Additionally, no other device other than a Drobo should
be placed on top of DroboShare.
8. Protect from Heat: Drobo, DroboPro, DroboElite, and DroboShare should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
9. Protect Power Cords: Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the
point at which they exit from the product.
10. Avoid Object and Liquid Entry: Never push objects of any kind into Drobo, DroboPro, DroboElite, and DroboShare
ventilation slots except drives compliant with the User Guide as they may touch dangerous voltage points or short the
parts, resulting in the risk of fire or electric shock. Never spill liquid of any kind onto Drobo.
11. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF ELECTRICAL PLUG TO WIDE SLOT AND INSERT FULLY.
12. DROBO, DROBOPRO, AND DROBOELITE CONTAIN A LITHIUM BATTERY WHICH CAN EXPLODE IF MISHANDLED. BATTERY
IS NOT FIELD OR USER-SERVICEABLE. Please dispose of battery in a manner consistent with local jurisdictions.
13. DRIVES IN DROBO, DROBOPRO, AND DROBOELITE WILL RETAIN HEAT AFTER USE. PLEASE USE CAUTION WHEN
REMOVING DRIVES FROM DROBO, DROBOPRO, OR DROBOELITE. TO SAFELY REMOVE DRIVES, PRESS THE DRIVE LATCH
TO RELEASE THE DRIVE AND ALLOW THE DRIVE TO COOL IN THE DATA BAY FOR 10 MINUTES BEFORE COMPLETELY
REMOVING THE DRIVE FROM DROBO, DROBOPRO, OR DROBOELITE. FAILURE TO FOLLOW THIS PROCEDURE MAY
RESULT IN INJURY FROM HOT DRIVES.
14. Damage Requiring Service: Drobo, DroboPro, DroboElite, and DroboShare should be serviced by an employee of Data
Robotics, Inc. or a Data Robotics, Inc. Authorized Reseller ("qualified service personnel"), and should be serviced when:
A. THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED;
B. LIQUID HAS SPILLED INTO DROBO, DROBOPRO, DROBOELITE, OR DROBOSHARE;
C. DROBO, DROBOPRO, DROBOELITE, OR DROBOSHARE HAS BEEN EXPOSED TO RAIN OR WATER;
D. DROBO, DROBOPRO, DROBOELITE, OR DROBOSHARE DOES NOT OPERATE NORMALLY WHEN YOU FOLLOW THE
OPERATING INSTRUCTIONS;
E. DROBO, DROBOPRO, DROBOELITE, OR DROBOSHARE HAS BEEN DROPPED OR THE CHASSIS DAMAGED;
F. DROBO, DROBOPRO, DROBOELITE, OR DROBOSHARE EXHIBITS A DISTINCT CHANGE IN PERFORMANCE.
15. Use only the supplied USB 2.0, FireWire 800, Ethernet, and power cables when operating Drobo, DroboPro, DroboElite,
or DroboShare.
Servicing – The user should not attempt to service Drobo, DroboPro, DroboElite, or DroboShare beyond that described as
user service items in the FAQ section of this manual, the Troubleshooting sections of the Help Files, or the support
Knowledge Base. All other servicing should be referred to qualified service personnel.
Cleaning – Unplug Drobo, DroboPro, DroboElite, or DroboShare from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners; use a damp cloth. If Drobo, DroboPro, DroboElite, or DroboShare comes in contact with any liquid,
unplug the power adaptor and let Drobo dry thoroughly before plugging back in.
Power Source – Drobo, DroboPro, DroboElite, or DroboShare should be operated only from the type of power source
indicated on the marking label or in this User Guide. If you are not sure of the type of power supplied to your home or
business, consult your local power company.
Overloaded Power Outlets – Do not overload wall outlets and extension cords, this can result in risk of fire or electric
shock.
Electric Shock – To reduce the risk of electric shock, do not disassemble Drobo, DroboPro, DroboElite, or DroboShare.
Doing so will void the warranty. Take it to a quailed service person when service or repair work is required. Opening or
removing covers may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when
Drobo or DroboShare is used.
Moving – Avoid moving Drobo, DroboPro, DroboElite, or DroboShare while it is plugged in to avoid shock and vibration
damage to the installed hard disk drives.
i