Operation - Lacor ZITRUS 69575 Bedienungsanleitung

1.- Connect the juicer to an appropriate outlet, taking into account the values defined in the
technical specifications section.
2.- Remove the protective cover (1).
3.- Turn the container (7) clockwise over the base (8) to join both parts and prevent them from
separating when you are going to pour the juice (PICTURE 1).
4.- Use the large cone (2) mounted on the small cone (3) to squeeze juice from large fruits such
as grapefruit or oranges. Remove the large cone and use the small cone to extract juice from
small fruits such as lemons and limes (PICTURE 2).
5.- The pulp filter, composed of the upper part (4) and the lower part (5) allows you to limit the
amount of pulp from the squeezed juice. Turn the pulp selector (6) to the left to decrease the
amount of pulp or to the right for more pulp (PICTURE 3).
6.- Cut the pieces of fruit to juice in half. Press one half of fruit against one of the cones with your
hand. The juicer will start automatically and stop as soon as you stop pressing (PICTURE 4).
NOTE:
Do not operate the juicer for more than 15 seconds straight. Take small breaks
during juice extraction to extend the product's service life.
7.- The juicer's motor rotates in both directions to guarantee better juice extraction.
8. The squeezed juice is stored directly in the juice container (7). Note that the maximum juice
capacity that can be stored is 750 ml / 26 OZ (PICTURE 5).
9.- Unplug the appliance from the electric current.
10.- Pour the juice into glasses for consumption (PICTURE 6)
1
4

OPERATION

2
5
3
6
33