EMC INSTALLATION
Incoming EKK 3G1.5
Not shielded
Motor cable
Ölflex Classic 110 CY/7G0.5
Shielded
EMC glands must be used for shielded cables.
The above cables or equivalent must be used to comply with the EMC Directive.
EMC GLAND
NOTE!
When connecting the shield to the EMC gland, it is important to do so as shown above.
Magnetic sensor, LiYCY 2x0.34
Shielded
Input signal, LiYCY 2x0.34/0.5
Shielded
12