Firmware-Upgrade - Creality CR-10 Smart Benutzerhandbuch

Thank you for choosing our products. For the best experience, please read the
instructions before operating the Printer. Our teams will always be ready to render you
the best services. Please contact us via the phone number or e-mail address provided at
the end when you encounter any problem with the Printer.
For a better experience in using our product, you can also learn how to use the printer
in the following ways:
View the accompanied instructions and videos in the TF Card.
Visit our official website www.creality.com to find relevant software/hardware
information, contact details and operation and maintenance instructions.
Firmware upgrade
Please login the official website https://www.creality.com/download, switch the language
and select the relevant printer and model and download the required firmware, you can
use it after the installation is finished.
Notes
1. Do not use the printer any way other than described herein in order to avoid
personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
4. Please use recommended resin to in case damage of machine.
5. Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
6. Please do not open the plastic cover during usage, otherwise the printing will be
interrupted.
7. Do not wear cotton gloves when operating the printer. Such cloths may become
tangled in the printers moving parts leading to burns, possible bodily injury, or
printer damage.
8. Please wait a moment after the print is finished. And please wear gloves to take
out the print by tools.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to remove dust, adhered printing plastics or any other material