Vision Fitness S60 Bedienungsanleitung Seite 7

• Remove the four mounting bolts from the back of the CONSOLE (12) and four screws
holding the console back cover with the screwdriver. (S60)
7
• Plug in the wire harness and the two heart rate wires to the back of the console.
• Attach the console to the console mast with the four bolts removed from the console.
• Plug in the 9-volt battery. (S60)
• Re-attach the CONSOLE BACK COVER (13) with the four screws removed previously.
(S60)
• Attach the CONSOLE BACK COVER (13) packed within frame carton by 2 pre-installed
screws on console. (S600E)
S60
12
S600E
12
13
8
ASSEMBLY COMPLETE!
S60
13
S600E
7