Operating - Fakir HYPO GUARD Benutzerhandbuch

EN
NOTE!
Use general tap water at 5-35 °C. Do not use ground water, dirty or treated water. It is
extremely normal to get a slight chlorine smell during operation.
CAUTION!
In order for the appliance to operate, the pitcher should be placed on the appliance
housing.
NOTE!
The operating options of your appliance are described in detail in the quick user guide. You
can operate your appliance with or without salt, depending on the area of use and purpose.
This process is an important feature to determine the areas of use of the electrolyzed
water. You can find out in which areas you can use the electrolyzed water your device has
generated in the provided quick user manual.

Operating

1. Standby Mode: It is the mode indicating that the appliance is ready for operation.
2. Sleep Mode: It is the mode that the device switches to for saving power.
3. Operating Mode: It is the mode during the operation.
4. Completion Mode: It is the mode indicating that the operation is completed.
5. Warning Mode: It is the mode that the device switches to when there is a problem with the
water in the pitcher.
Place the pitcher on the housing and plug the device in
as shown in Figure 3. The device will turn on with a beep
sound, all LED lights on the device housing will flash and
the device will go into standby mode. In standby mode,
the device is ready for operation. When the appliance is
in the Standby Mode and the start key is pressed for 5
seconds, it goes into the sleep mode or the appliance
goes into to Sleep mode automatically if the button is not
pressed for 3 minutes. If you want to return to standby
mode from sleep mode, press the button for 1 second.
With a beep, the appliance returns to standby mode.
32