EN
Installation the Appliance
Place the appliance on a flat and level ground.
Place the appliance at least 10 cm away from the wall.
As shown in <Fig.1>, combine the plug with tabs on the adapter sockets and lock them by
turning them in the direction of the arrow. Connect the adapter to the adapter socket at the
bottom of the Housing (Figure 2).
2g
Fill the tank with 400 ml of tap
Add a spoonful of salt (2 g). Attention
Stir the mixture using the
water.
must be paid not to exceed 2 g salt.
Stirring Bar.
Place the device on the
Press the Start Button, the device will
You can add the water generated
housing after closing the cover
start in 3 seconds. The device turns off
after the operation into a container or
of the pitcher.
when the start button is pressed for 5
into the spray bottle that is provided
seconds. Operation time is 5 minutes.
with the device, depending on your
purpose.
31