Silvercrest SMW 700 D2 Bedienungs- Und Sicherheitshinweise Seite 27

˜ Using suitable cookware
The ideal material for use in a microwave
oven is microwave-permeable, allowing the
energy to penetrate the container to heat
the food . Microwaves cannot penetrate
metal . For this reason, metal containers and
cookware should not be used .
When using the product for heating, do not
use products made of recycled paper . These
can contain minute fragments of metal, which
can generate sparks and/or fires .
We recommend the use of round/oval
cookware instead of square or oblong
containers, as food in corner areas tends to
overcook . The following list provides general
hints to assist you in selecting the correct
cookware .
Cookware
Heatproof glass
Non-heatproof glass
Heatproof ceramic
Microwave-suitable plastic
dishes
Kitchen roll
Metal tray/plate
Aluminium foil and foil
containers
m WARNING! Risk of fire! Never use
metallic objects when you are using the
product . Metals reflect the microwave
radiation and this leads to the generation of
sparks . This can cause a fire and irreparably
damage the product!
28 GB/IE
˜ Before first use
m WARNING! Risk of fire! Never operate
the product when it is empty .
Remove the packaging material (including
protection foils and transport protectors inside
the cooking chamber
are complete .
Clean the product and its accessories (see
"Cleaning and care") .
Clean the surface with a dry cloth to remove
water or dust .
˜ Positioning the product
m WARNING! Risk of fire! This product
is not suitable for installation in a kitchen
cabinet . In closed cabinets, the ventilation of
the product is not sufficiently guaranteed . The
Microwave product could then be damaged and there is
a risk of fire!
Yes
Place the product on a flat surface that leaves
No
enough space for ventilation:
Yes
–
Yes
Yes
No
–
No
˜ Assembly
Insert the turntable holder
drive (inside the cooking chamber
Place the roller
(inside the cooking chamber
) . Check if all parts
8 ] [
A minimum of 10 cm of free space must
remain between the product and the
adjacent walls (including side and back
wall) . It must remain possible to fully open
the door .
[ 7 ]
A minimum of 20 cm of free space must
remain above the top surface of the
product .
on the roller surface
2 ] [
on the turntable
2 ] [
) .
8 ] [
) .
8 ] [