iCarsoft i960 Handbuch

Disclaimer
All information, illustrations, and specifications contained in this
manual are based on the latest information available at the time
of publication. The right is reserved to make change at any time
without notice.
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the
Multi-system Scanner, please read this user's manual first
carefully and observe the following safety precautions at a
minimum whenever working on a vehicle:
• Always perform automotive testing in a safe environment.
• Do not attempt to operate or observe the tool while driving
a vehicle. Operating or observing the tool will cause driver
distraction and could cause a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away
from all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust
gases are poisonous.
• Put blocks in front of the drive wheels and never leave the
vehicle unattended while running tests.
• Use extreme caution when working around the ignition
coil, distributor cap, ignition wires and spark plugs. These
components create hazardous voltages when the engine is
running.
• Put the transmission in P (for A/T) or N (for M/T) and make
sure the parking brake is engaged.
• Keep a fire extinguisher suitable for gasoline/chemical/
electrical fires nearby.
• Don't connect or disconnect any test equipment while the
ignition is on or the engine is running.
• Keep this tool dry, clean, free from oil/water or grease. Use a
mild detergent or a clean cloth to clean it if necessary.
Multi-system Scanner Series User's Manual
EN
I