Klarfit Rocketkid Bedienungsanleitung Seite 19

ASSEMBLY
• Put the four frame components together so that you get a closed circle.
• Now lay the frame flat on the floor and insert the feet into the six
openings. Since the top and bottom are identical, it doesn't matter which
side you start on.
• Screw in the feet so that the threads (of the feet and of the frame) overlap
and fix the feet with one screw each.
• Place the frame on the feet.
• Make sure that the connecting loops on the safety net are in the correct
places. To do this, hold the net by one of the nylon patches at the bottom
and top. Similarly, hold one of the nylon loops on the mat - these should
be just below the nylon patch. The patch on the top, the lower Velcro
fasteners and the nylon loop on the mat should be in line (white seam).
• The nylon loop (below) is placed around the remaining loops, these must
be directly on the frame.
EN
19