Software Configuration; Software Installation - ATOMSTACK Cambrian Bedienungsanleitung

8.1 Software installation

• AtomStack Cambrian uses Marlin open-source firmware, so any object software that supports Marlin firmware can be compatible with Cambrian printers. Here, our global
popular Ultimaker Cura software. Ultimaker Cura is an excellent open-source software that supports macOS, Windows, and Linux systems.
• Visit the following link to get Cura ：https://ultimaker.com/software/ultimaker-cura. Please follow the instruction to finish the installation after downloading the software.
There are 3 sections configuration of Cura for AtomStack Cambrian A: Printer configuration B.Material configuration C.Object parameter configuration（All the necessary
document, configuration file, and video is in the TF card). Cambrian Pro has equipped two different extruders, AtomStack E285 E3 extruder（for TPR filament or any other
2.85mm filament diameter）and AtomStack E175 H2 extruder（for PLA PETG, etc. any other 1.75mm filament diameter）. And the diameter of the nozzle is also different,
E285 E3 is 0.8mm，E175 H2 is 0.4mm，we already set the parameter for each nozzle. For the following instruction, we will configure based on the TPR material with
AtomStack E285 E3 extruder to show the configuration, likewise, you can configure E175 H2 by following the steps 8.2~8.4，please pay attention that the parameters of
the two extruders are different，you need to configure by the correct configuration file. You can also visit our website to obtain the latest You can also visit our official
website:http://atomstack3d.com/3dprinterdownload to get the latest motherboard firmware, screen firmware, configuration files, manuals, and other information (Note:
For data version upgrades or updates, please pay attention to get the latest version in time)

8. Software configuration