2. Side‐play adjustment
Side‐play (lateral movement of saddle nose) could be developed over a time of
heavy riding. You can determine which pivot is in playing and get rid of this play
easily by following steps.
a. Use a 2.5mm allen key to remove the stop screw.
b. Use a 4mm allen key to tighten the screw to decrease play.
c. To re‐tighten the 2.5mm hex screw up to 3~4Nm torque.
Step2.
B
WARNING!
Failure to comply with the given warnings and instructions may cause serious damage to the
product and/or serious injuries.
Be sure to read this manual thoroughly before using your seatpost. Inappropriate usage of your
seatpost may cause damage to the product or serious injuries.
Only use genuine parts. The use of aftermarket replacement and spare parts voids the warranty of
your seatpost and might cause failure to it. This could result into an accident and avoidable injury.
This instruction sheet contains important information about the correct maintenance of your seatpost.
Nevertheless please be informed that common mechanical knowledge may not be sufficient to install,
repair, service or maintain your seatpost. Therefore we strongly recommend getting your seatpost
installed, serviced and/or maintained by a trained and qualified bicycle mechanic. Improper
installation, service or maintenance can result in failure of the product and avoidable accidents.
If your are going to use your seatpost in combination with a child seat we strongly recommend using
the rubber protection cover which is available as a spare part.
Study all other owner's manuals provided with your bike and make yourself familiar with the
components mounted to your bike.
A
Step1.
C
Step3.