Operation; Care And Storage - Beurer FM 100 Gebrauchsanleitung

5. Operation

Connect the device to the mains by first plugging the power cord into the socket on the device and then
plug it into the mains outlet.
The massage must be pleasant and relaxing at all times. Stop the massage or change your position or the
contact pressure if you find it is painful or unpleasant.
• Place the device in front of the chair or couch and select one of the handle positions: footrest, foot mas-
sage or calf massage with the handle on the side. Sit comfortably on the seat cover.
Switch on the device with the
• The device has an automatic shutoff. It will switch off automatically after 20 minutes of operation. Allow
it to cool down for about 20 minutes before switching it on again. You should not exceed 30 minutes a
day of massage. Using the device for longer can over-stimulate the muscles and cause tension instead of
relaxation.
• After use always unplug the cord from the wall outlet, then disconnect it from the device and store it in the
cord storage box on the device.
• DO NOT disconnect the device from the mains supply during operation. Always switch it off only once it
has reached the starting position at the bottom

6. Care and storage

CLEANING
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent
for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.
• Do not use the device again until it is completely dry.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
7. In the event of problems
Problem
Massage unit
moves more
slowly.
Massage unit does
not move.
button. Place your feet on the device.
Cause
The load on the massage unit
is too great.
Appliance not connected to
the power supply.
Device not switched on.
Overheating protection tripped,
device is damaged.
Remedy
Reduce the pressure on your feet or calves.
Connect the plug to the mains supply and switch on
the appliance.
Switch the device on with
Contact your authorized dealer or the service
address.
10
.