Appliance Description; Start-Up; Operation - Beurer MG 205 Gebrauchsanweisung

7. Appliance description

Shiatsu massage pillow (front)
1
2
3
4
5
Hand switch
1
2
3
4
5
6
7

8. Start-up

• Position the seat cover upright on a suitable seating arrangement with seating surface and backrest (chair,
sofa, or similar). Ensure that the seat cover is supported over its entire area and has a sufficiently high
backrest.
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the device to the mains power supply.

9. Operation

Gently press your back against the massage device to start with. Then make sure that you are in a comfort-
able position before gradually shifting your weight onto the massage device.The massage must be pleasant
and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is
painful or unpleasant.
1. Four massage heads, rotating in pairs with
2. Fastening straps
3. Mains cable
4. Hand switch
2
5. Storage bag
1. Button
2. demo button
3. heat button (heating)
4. full back button (entire back massage)
5. upper back button (upper back massage)
6. lower back button (lower back massage)
7. timer button (5 –10 –15 minutes)
14
vertical movement