PROBLEM
Buzzing noise coming from
the loudspeakers.
PH-10 is not working
With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft
cloth to sweep dust and remove stains.
Any acid or not extremely soft cloth will irreversibly damage the unit. Do not use alcohol.
If you have any questions contact us at: service@goldnote.it
CAUSE
|
The tonearm and the
cartridge are not installed
properly.
|
The interconnect cables
used on the input/output
are not shielded.
|
The power cord is not
plugged in.
|
The cables are not
connected to the
tonearm.
|
The IEC fuse is blown
CLEANING THE UNIT
9
SOLUTION
|
Check the cartridge and
the tonearm.
|
Always use shielded
cables.
|
Connect the power cord
properly and ensure the
power outlet is working.
|
Ensure that the cables are
properly connected.
|
Replace it with one of the
same value.