Equipment Marking - Identification Plate; Contact - ECOLAB LMIT09 Kurz- Betriebsanleitung

The graphics shown in this manual are principle sketches, the actual
situation may differ slightly. Generally, the graphics are structured in such a
way that a principle is recognisable.
Copyright
This manual is copyright protected. All rights reserved by the manufacturer.
Transferring this manual to third parties, reproduction in any form, even partially, and
the exploitation and/or disclosure of the contents without written permission from Ecolab
Engineering (hereinafter "the manufacturer") is prohibited except for internal purposes.
Any contravention of this will result in claims for damages.
The manufacturer reserves the right to assert additional claims.
1.2 Equipment marking – identification plate
Information on equipment marking or the information on the identification
plate can be found in the chapter on "Technical data".
It is important for all queries to state the correct name and type.
This is the only way of ensuring fast and accurate processing.
1.3

Contact

Manufacturer
Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
Before contacting the manufacturer,
we always recommend contacting your
distributor first.
7
General
417101558 Rev. 06-06.2021