Hamax OUTBACK Bedienungsanleitung Seite 12

• Verify that the folding mechanism is locked on both sides by trying to push it back down.
• Lock the push bar with the release handle.
[7] Folding the trailer
• Ensure that the push bar is unlocked.
• Push the folding lock button [7a] in and than pull the straps towards you [7b] until the auto-lock is disengaged on both sides.
• Guide the trailer down into its folded position.
[8] Installing the quick release wheels
• Ensure that the parking brake is not engaged [2m].
• Make sure that you remove the cap that is protecting the wheel axle [8a]. Press the push button [8b] and insert the wheel axle
into the socket. Verify that the wheel is securely fastened by pulling the wheel.
[9] Mounting the safety flag
• Place the flag pole [9a] into the socket [9b] on the side of the bicycle trailer that is most exposed to the road.
USE
[10] Attach the accessory [1c] [1f] at the safe connection point
• Make sure the slider [10b] is upwards. Slide the accessory [10c] into the opening at the front until it locks into place.
• Move the slider downwards until it snaps into place. The green color indicates that the connection point is locked. Verify that
the slider is locked by pulling it upwards.
[11] Remove the accessory [1c] [1f] from the safe connection point
• Push the grey button and move the slider upwards until it snaps in place.
• Push and hold the button on the accessory down. Pull the accessory out of the Safe Connection Point.
TIP: You can use the handle [10a] in the connection point when changing your accessories.
[12] Attaching the bicycle arm to the bicycle
• Securely attach draw bar & safety strap prior to use. Ensure that the trailer is unloaded when attaching & disconnecting it to/
from your bicycle.
• Slide the bicycle arm onto the hitch [12a]. Insert the retaining pin [12b] through the hole in bicycle arm and close it. Verify that
the bicycle arm is securely fixed by pulling the bicycle arm. Wrap safety strap around bike frame and fasten hook to D-ring
[12c].
• Make sure that you put the safety strap around the chain stay [12d] or seat stay [12e] of your bicycle frame.
TIP: When you are not using the bicycle arm you can store it in the trailer.
TIP: When the safety strap is too long you can wrap it twice around the frame to ensure that the strap does not interfere with
any moving part of the rear wheel.
[13] Adjusting the push bar
• Turn the push bar release handle [2k] upwards to unlock the push bar [2a].
• Rotate the push bar to the desired position.
• Turn the push bar release handle downwards until you feel it locks into its end position and secures the push bar. Verify that the
push bar is locked by gently pushing the push bar down.
[14] Using the parking brake
• To engage: Push the parking brake pedal down. The trailer can move slightly back and forth due to the movement in the
adjustable suspension.
• To disengage: Pull the parking brake pedal until it releases. Push or pull the trailer slightly to make sure the brake is disengaged
at the wheels.
[15] Front covers and shades
• The Outback bicycle trailer has a plastic front cover [15c], a mesh front cover [15d] and an additional sun shade [15b]. To open
and close the front covers, use the zippers along the sides. To fix the sunshade use the Velcro. The front covers can be stored
into the front cover pocket [15a] when not in use.
• The top window of the exterior also has an optional sunshade. [15e]
TIP: For heavy rain Hamax supplies a full rain cover.
[16] 5-point safety harness
• Seat your child and guide the arms through the opening between the shoulder [16a] and waist belt [16c]. Check that the
shoulder straps are aligned with your child' s shoulders. Adjust the height by sliding the buckles [16e] behind the headrest up or
down.
All manuals and user guides at all-guides.com
p. 12