Herunterladen Inhalt Inhalt Diese Seite drucken

Hamax OUTBACK Bedienungsanleitung Seite 11

Vorschau ausblenden Andere Handbücher für OUTBACK:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 29
Bicycle safety
Before connecting the bicycle trailer to your bicycle, ensure your bicycle is suitable for towing a trailer and is equipped with
well functioning brakes. It is recommended that the bicycle to which the trailer will be attached undergoes a safety check by a
qualified bicycle mechanic before attaching the trailer.
Riding behavior
When towing a trailer, your bicycle behaves heavier and less responsive due to the weight of the trailer. Familiarize yourself with
this behavior by experimenting with a loaded trailer in a quiet area first, before entering crowded public roads.
Be aware that due to the weight of the trailer, your bicycle has a longer braking distance. Use caution when driving down hill, as
your bicycle will gain more speed rapidly.
Do not exceed the maximum speed specified in this manual and slow down when making turns and on rough roads. Avoid riding
over rocks, curbs or other obstacles that may cause the trailer to tip over. Using the trailer in unfavorable weather, road or traffic
conditions can result in unsafe situations. Always use good judgement when deciding if conditions are safe to use the trailer.
High visibility
For optimal visibility and safety in the traffic, the multifunctional carrier has front (white), rear (red) and wheel (orange)
reflectors. The tires also have reflective lines. Reflective piping is integrated in the outer fabric. When using the carrier as a
bicycle trailer, you also need to apply the orange safety flag for even better visibility.
Intended use
The trailer is intended for transportation of children as specified in this manual on public roads with light traffic, sidewalks and
smooth paths. Hamax considers using the trailer in any other way as unintended use, including but not limited to:
• riding with excessive speed
• riding on rough off-road conditions
• using the trailer for commercial purposes
• transporting animals
• storing luggage in areas inside or outside the trailer other than in the trailer' s luggage compartment
• towing the trailer by motorized vehicles
• failing to comply with the instructions in this manual
GETTING STARTED - INSTALLATION
[1] Packaging content & required tools
• Trailer body (1x) [1a]
• Quick release wheel (2x) [1b]
• Bicycle arm (1x) [1c]
• Wheel guard including 2 screws
for installation (2x) [1d]
• Safety flag (1x) [1e]
• Stroller wheel (1x) [1f]
• User manual Hamax Outback / Outback One (1x)
• Required tools: Phillips screw driver [1g]
• Required tools: Wrench, size 15 [1h]
[3] Installing the hitch on your bicycle
• Remove quick-release or nut [3a] from the left side of your bicycle' s rear wheel axle. Place hitch [3b] between quick-release or
nut and frame. Tighten the quick-release or nut back on according to the bicycle manufacturer' s instructions.
• Ensure that the orientation of the hitch is correct. Keep the alignment / angle between hitch and bicycle arm as straight as
possible.
[4] Installing the wheel guards
• Align the holes [4a] on the wheel guard plate with the holes on the wheel guard [4b]. Insert the 2 screws from the inside of the
trailer through the holes in the fabric into the wheel guard. Use the screws provided with the trailer. Fasten both sides in the
same way.
[5] Setting the adjustable suspension
• The suspension can be adjusted to give a comfortable ride. Ensure that the suspension is always set to match your children' s
weight. Ensure that the trailer is unloaded when adjusting the suspension. Rotate the adjustment ring [5a] to the desired
position. Make sure that the left and right suspension are in the same position.
[6] Unfolding the trailer
• Pull push bar upwards until the auto-lock engages on both sides.
p. 11
All manuals and user guides at all-guides.com
[2] Product overview
• Push bar [2a]
• Front cover pocket [2b]
• Front cover [2c]
• Seat paddings [2d]
• Safe connection point [2e]
• Accessory, stroller wheel [2f]
• Adjustable suspension [2g]
• Quick release wheel [2h]
• Wheel guard [2i]
• Seat backrest rear [2j]
• Push bar release handle [2k]
• Storage space [2l]
• Parking brake [2m]

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Outback one

Inhaltsverzeichnis