Configuration Process - Samoa NEXU Installationshandbuch

6. SOFTWARE CONFIGURATION
6.1.1 HOW TO CHANGE THE IPV4 ADDRESS FOR A LOCAL NETWORK
Windows 10
Click on Ethernet 2 and other window will pop up.
Now Click on Internet Protocol Version 4 (TCP/IPv4).

6.2 CONFIGURATION PROCESS

This process has to be made by a superuser (user with installation rights).
The superuser code is assigned to each Samoa distributor individually
You have to press the padlock at the upper right part of the screen and
insert the Superuser credentials.
Once you enter, you will see the configuration option in the upper right part.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Click on Properties.
Choose Use the following IP address and set 192.168.1.101 (the Subnet
mask will be set automatically to 255.255.255.0 If not, please set it)
Then press OK and once you open the browser again and insert
http://192.168.1.100:4000,
NexU software.
Press that option and you will see a home page with a brief summary of
the installation (if it is not new). It is under the Option "General". You will
see the number of products, the number of tanks, the number of devices
and the number of groups.
you will be able to access
R. 06/21 838 861
EN
the
35