Ritter ET 10 Gebrauchs- Und Montageanleitung Seite 19

English
– Only connect the toaster to a
suitable voltage source that
conforms with the specifica-
tions on the type label.
– Never leave the toaster unat-
tended while it is operating.
Risk of electric shock
– Always remove the power plug
from the socket in the event of
a malfunction, before cleaning
and when the toaster is not in
use. When doing so, pull on
the plug and not on the cable.
– Never immerse the toaster
in water. Never expose the
toaster to rain or any other
form of moisture. If the toaster
falls into water, unplug the
cable from the mains socket
before removing the toaster
from the water. Have the
toaster inspected at an author-
ized service location before
using it again.
– Always ensure that your hands
are completely dry before
using the toaster. Do not use
the toaster if it is wet or damp
or while you are standing on a
damp surface. Do not use the
toaster outdoors.
– Stop using the appliance
immediately if any parts are
damaged and contact the ritter
after-sales service.
12
– If the power cord is damaged,
it must be replaced by the
manufacturer, the manufac-
turer's after-sales service or
a similarly qualified person
to eliminate risk of personal
injury.
– The heating wires are supplied
with mains power during oper-
ation. Therefore, you should
never place any metal objects
in the toaster.