Victron energy SmartSolar MPPT 150/70-Tr VE.Can Anleitung Seite 23

5. Specifications, 150/70
SmartSolar charge
controller
Battery voltage
Maximum battery current
Nominal PV power, 12V 1a,b)
Nominal PV power, 24V 1a,b)
Nominal PV power, 36V 1a,b)
Nominal PV power, 48V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher sort circuit current may damage the controller in case of reverse
polarity connection of the PV array.
12/24/48V Auto Select (36V: manual)
150V absolute maximum coldest conditions
145V start-up and operating maximum
Less than 35mA @ 12V / 20mA @ 48V
Default setting: 14,4V / 28,8V / 43,2V / 57,6V
Default setting: 13,8V / 27,6V / 41,4V / 55,2V
Default setting: 16,2V / 32,4V / 48,6V / 64,8V
multi-stage adaptive (eight preprogrammed
algorithms) or user defined algrithm
-16mV/°C / -32mV/°C / -64mV/°C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
5000m (full rated output up to 2000m)
DPST AC rating: 240VAC / 4A
ENCLOSURE
IP43 (electronic components)
STANDARDS
EN/IEC 62109-1, UL 1741, CSA C22.2
21
MPPT 150/70
70A
1000W
2000W
3000W
4000W
50A
98%
(adjustable)
(adjustable)
(adjustable)
95%, non-condensing
Indoor, unconditioned
PD3
CAN, VE.Direct or Bluetooth
Yes (2 pole connector)
DC rating: 4A up to 35VDC, 1A up to 60VDC
Yes
Blue (RAL 5012)
35 mm² / AWG2 (Tr models)
35 mm² / AWG2
IP22 (connection area)
3 kg
185 x 250 x 95 mm