Troubleshooting - Fakir DRYWIND Benutzerhandbuch

Troubleshooting

NOTE!
Before calling the customer services, check if you can fix the problem/error by yourself.
For this purpose, please see the "TROUBLESHOOTING" section. If you cannot solve the
problem/error, please call the customer services. Before calling please make ready the
model name and product serial number. You can find this information on the TYPE LABEL
of your product. Hotline: (+90 212) 444 0 241
SYMPTOM
Fan and
Compressor
not operating
Compressor
running but Fan
is not operating
Fan working but
compressor
not operating
No
dehumidification
or
low performance
Unit Noise
Unit frosted up
POSSIBLE CAUSE
No power or supply voltage too
low
Plug damaged or power cord
broken
Motor failure
Power supply voltage too low
Within 3 minutes protection time
Compressor failure
Unit could be in defrost mode
Filter blocked
Gas leakage
Temperature & Relative
Humidity too low
Uneven surface
Motor or compressor
mountings loose
Sound from water flow
Filter blocked
Defrost mode not working
PORTABLE SOLUTION
Check unit connection to
supply or contact the power
supply company.
Contact a qualified electrician.
Contact a qualified electrician.
Contact the power supply
company.
The return to normal after 3
minutes.
Contact a qualified electrician.
Normal
Clean filter
Contact a qualified
electrician
Normal
Reposition unit on flat
surface
Contact a qualified
electrician
Normal, flow of liquid gas
Clean filter
Switch off. Contact a
qualified electrician.
31
EN