Troubleshooting - Fakir INOVAX Benutzerhandbuch

Troubleshooting

Your appliance is processed via Quality Control against any malfunction.
Problem
Motor won't start
Vacuum cleaner
is not charging
The vacuum
cleaner is
overheating
Empty the dust
containers and
properly clean the
filtration system
The suction
performance is
not sufficient
Cause
The battery is discharged.
The "" button is not in the 0 position
No power in the electrical socket
Charging adapter or its cord is damaged
Filtration system is soiled
Filtration system is soiled
Regulation in the position I.
Dust containers full
Clogged filter
The accessories are blocked
The battery is discharged.
Solution
Recharge the battery
Press the "" button
Check if the circuit breakers
are on
Contact
service centre
Empty the dust containers
and
filtration system
Empty the dust container
and
filtration system or replace
the HEPA filter
Set the regulation to III.
Empty the containers
Clean or replace the filter
Remove the blocking objects
Recharge the battery
43
EN
the authorised
properly clean the
properly clean the