Using The Vacuum Cleaner (Fig. 6 A/B); Operation (Fig. 5) - Fakir INOVAX Benutzerhandbuch

ATTENTION!
– The vacuum cleaner can be charged only if it is placed in the charging base H.
– Let the vacuum cleaner recharge as soon as its suction performance is weaker.
– If you charge the battery for the first time or after long storage, about 60 % of its total
capacity is charged. After repeated discharge and repeated recharge the battery is charged
to 100 %.
– After completing hard work or in hot environment, the battery may be too hot for charging.
Let the battery cool down before charging.
– If the appliance is used daily, do not unplug the power cord from the socket so that the
appliance is fully charged at all times. Battery overcharge is prevented. If you are going to
be absent for a longer time (more than one day), unplug the power cord from the socket so
as to optimize the battery life.
– For ensuring longer life of the battery we recommend full discharge and then full recharge
of the battery four times a year.

Using The Vacuum Cleaner (Fig. 6 A/B)

According to the selected cleaning activity, use either the vacuum cleaner alone and select
the corresponding accessories (C, G), or assemble the vacuum cleaner with an extension
adapter (C, E) and select floor nozzle with a rotation brush F. The floor nozzle with a rotation
brush F is intended for vacuuming carpets with low pile or smooth flooring.
UV-C Led Light bed and upholstery turbo brush (G1) is designed for effective vacuum
cleaning. Thanks to UV-C technology, your device destroys viruses and bacteria on the
surface You can use acessories G2, G4, C for vacuuming places that are hard to access and
radiators. Acessory G3 is recommended for vacuuming various types of furniture.
ATTENTION!
The floor nozzle with the rotation brush is not intended for vacuuming impurities from
carpets with high pile.
– When you are using the floor nozzle F or small turbobrush G1 and the rotary brush
will get blocked, (e.g. due to sucking in large foreign objects, due to winding carpet piles,
threads or hair on them etc.) turn off the vacuum cleaner by switch A1 or C1.
Then remove the cause of blocking or clean the rotation brush if necessary (see par. V.
MAINTENANCE).

OPERATION (Fig. 5)

1) Vacuum cleaner switching on/off
– The vacuum cleaner may be switched on/off by A1 switch, or by C1 switch if you use the
extension piece C.
39
EN