ADE Nova Bedienungsanleitung Seite 24

Body analysis
1. Briefly press SET, in order to switch the scales on.
2. Use the or
stored.
The memory cell number flashes a few times, then "0.0" and the selected unit of
measurement are displayed, e.g. "kg".
3. Position yourself barefoot on the scales. Stand still and do not hold on to anything.
− Make sure that both feet are on a sensor.
− There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
The measured weight will be displayed shortly thereafter. The display then shows "o"
and the body analysis is carried out. Remain standing still.
Your measured values will then be shown to you repeatedly on the display:
Symbol
kg / lb / lb:st
1.
2.
3.
4.
5.
KCAL
6.
BMI
7.
Calling up stored values
After an analysis has been performed, you can display the values of your last
measurements at any time.
1. Press SET and select your memory cell.
The memory cell indicator stops flashing after a few seconds and the indicator "0.0"
appears on the display, as well as the unit of measurement, e.g. "kg".
2. By pressing or
pressing or , select the manual display of the last set of measurements.
24
button to select the memory cell where your personal body data are
Meaning
Your body weight in the set unit of measurement
Your body fat proportion in % with simultaneous evaluation
indicator.
i-- (too little body fat)
i- (slim)
i (normal)
i+ (too much body fat)
i++ (obese)
Your body water in %
Your muscle mass in %
Your bone mass in %
Your basal metabolism in kcal
Your body mass index
once, select the automatic display or, by repeatedly
BA 2103-1 | BA 2103-2 body analyser scales